Wow! Enjoying this new hobby...

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • mcdowch
    Handtools only
    • Sep 2005
    • 3
    • Marietta, GA, USA.

    #1

    Wow! Enjoying this new hobby...

    Folks,

    I have to say, after lurking around this forum for several months, I finally bought a BT3100 and started down what I think will be a great hobby.

    My wife gave me a couple of projects to start with. Interestingly enough, the the span of 4 hours, I learned that table saws produce a LOT of dust (next time move the SUV), the blade IS sharp (move the hands) and kickback is dangerous (again - move the SUV).

    In all seriousness, I want to express my appreciation to all who contribute to this forum.

    Regards,
    Chuck
    \"You don\'t drown by falling in the water - you drown by staying there\"
  • Jim Boyd
    Veteran Member
    • Dec 2002
    • 1766
    • Montgomery, Texas, USA.
    • Delta Unisaw

    #2
    quote:Originally posted by mcdowch

    Folks,

    I have to say, after lurking around this forum for several months, I finally bought a BT3100 and started down what I think will be a great hobby.

    My wife gave me a couple of projects to start with. Interestingly enough, the the span of 4 hours, I learned that table saws produce a LOT of dust (next time move the SUV), the blade IS sharp (move the hands) and kickback is dangerous (again - move the SUV).

    In all seriousness, I want to express my appreciation to all who contribute to this forum.

    Regards,
    Chuck
    Welcome! Remember to move the SUV and hands! Never, ever, EVER look at a lathe or hand planes[]
    Jim in Texas and Sicko Ryobi Cult Member ©

    Comment

    • monte
      ***** Windbag
      • Dec 2002
      • 5242
      • Paw Paw, MI, USA.
      • GI 50-185M

      #3
      Welcome to the group Chuck! Be safe and enjoy your new saw!
      Monte (another darksider)
      Reporting Live from somewhere near Kalamazoo

      http://community.webshots.com/user/monte49002

      Comment

      • Popeye
        Veteran Member
        • Mar 2003
        • 1848
        • Woodbine, Ga
        • Grizzly 1023SL

        #4
        Welcome aboard, Be safe, Have fun. Pat
        Woodworking is therapy.....some of us need more therapy than others. <ZERO>

        Comment

        • Tom Hintz
          Senior Member
          • Feb 2004
          • 549
          • Concord, NC, USA.

          #5
          Chuck,
          It sounds like you have learned a few of the more important facts of the woodworking life all in the first day! Of course, now that you have admitted to knowing about the hands/blade problem, if you ever do that again, we all get to slap you on top of the head. Everybody wants you to have fun, not hurt yourself so remember that lesson, pay attention always and keep exploring woodworking!

          PS: Heed the advice about not looking at lathes. I have hand planes also but it is the lathe that causes the major disruptions (and dissappearing trees in my yard) in my life.

          Tom Hintz
          NewWoodworker.com LLC

          Comment

          • mater
            Veteran Member
            • Jan 2004
            • 4197
            • SC, USA.

            #6
            Welcome to the forum Chuck. Glad you decided to join us.
            Ken aka "mater"

            " People may doubt what you say but they will never doubt what you do "

            Ken's Den

            Comment

            • Pappy
              The Full Monte
              • Dec 2002
              • 10490
              • San Marcos, TX, USA.
              • BT3000 (x2)

              #7
              Welcome to the Asylum, Chuck!

              Ignore the Chicken Little-ish warnings above about hand planes. They are not addictive! All you need is a good #3 or #4 for smoothing, a #7 or #8 for jointing, and a couple of decent block planes for touch up and shaping. Maybe an 80 or 81 scraper...a 12 and a 12 1/2 scraper....at least one 112 scraper...But they are not addictive!!!!

              Don, aka Pappy,

              Wise men talk because they have something to say,
              Fools because they have to say something.
              Plato

              Comment

              • Rounder
                Veteran Member
                • Jan 2003
                • 1287
                • Sanford, FL, USA.
                • BT3100

                #8
                Welcome to the group. I am sure someone has told you, or you have already read, about the redline. As far as the lathe and planes, it is like watching a horrible accident, you can't help yourself. Then comes the great bandsaw debate. Followed by a discussion on what chisels you should own.

                I would tell you to run away, but alas it is too late. Your stuck here with the rest of us addicts.
                George AKA Rounder

                "Amarillo Slim, the greatist proposition gambler of all time held to his father's maxim; You can shear a sheep many times, but you can skin him only once."

                Comment

                • jhart
                  Veteran Member
                  • Feb 2004
                  • 1715
                  • Minneapolis, MN, USA.
                  • BT3100

                  #9
                  Welcome Chuck. Actually the addiction starts with this forum. I need to get my daily dose.
                  Joe
                  "All things are difficult before they are easy"

                  Comment

                  • John Hunter
                    Veteran Member
                    • Dec 2004
                    • 2034
                    • Lake Station, IN, USA.
                    • BT3000 & BT3100

                    #10
                    Welcome aboard Chuck.
                    John Hunter

                    Comment

                    • gmack5
                      Veteran Member
                      • Dec 2002
                      • 1972
                      • Quapaw, Oklahoma, USA.
                      • Ryobi BT3000SX & BT3100

                      #11
                      Welcome Chuck,

                      Congratulations on the acquisition of your BT3100 and welcome to the "family".

                      One of the first things you need to do, after you get your BT3100 Saw assembled is, following your Owner's Manual, go thru the entire set-up proceedure, step by step, in the sequence laid out in the Manual. Each set up proceedure builds on the preceeding proceedure, so you MUST keep them in sequence.
                      Usually the Saw is set up properly, right out of the box, but you should still check it as this gets you familiar with all the adjustments on the saw and assures you that everything is as it should be.

                      Here's some free plans that'll keep you busy for a while. http://www.woodworkersworkshop.com/r...ex.php?cat=102

                      And here's some additional information about your Saw that you may find useful.

                      Regardless of what you've read or others have told you, NEVER use any wax or lubricant on your saw that contains Silicone, this includes all automobile waxes and polishes and most spray-on furniture polishes. The reason is simple, most of them contain Silicones and they will make your projects difficult to finish.
                      Silicones repell liquid, making "fish eyes" in your finishes, this will force you to remove the Silicones from your project and start over. That stuff (Silicone) migrates all over every where, don't ask me how, it just does.
                      If you put it in one place, eventually it will be all over the
                      entire saw.

                      Your best bet is to use a "dry" lubricant, such as Teflon (PTFE), Powdered Graphite, or Candle Wax for the Raising/Lowering and Tilt mechanisms below the table top.

                      Then use either Johnson's Paste Wax, Minwax's "Finishing Wax" or Butcher's Wax on the working surfaces, table tops (All three of them) and the Rip Fence.

                      Do NOT Wax the Front and Rear rails or the Miter Fence. As a mater of fact, you may want to glue 220 grit sand-paper to the front face of the Miter Fence, cause you don't WANT things to slide on there.

                      You might also want to check out the "Articles" section on the www.BT3central.com site. Lots of good maintenance information on your saw and some of the Jigs and Fixtures that BT3Central members and others have designed for it. Located here: http://www.bt3central.com/articles/ The only thing you'll need to access the information is a recent copy of the Adobe Reader (It can be downloaded from the BTcentral site). One of the Articles mentioned is a "Check List", written by Jim Frye. You can find it here: https://www.sawdustzone.org/articles...nce-check-list

                      This list contains all the different areas on your saw that need to be periodically inspected or given some sort of special attention. In other words, a "Preventative Maintanence Check List" or PM. Performing this PM on a monthly basis would be a good idea. One of the other things you'll find there is an on-line copy of the User's Manual in downloadable pdf format (a handy thing to have).

                      Something you might think about is the use of a set of Draftsman's Triangles instead of the Carpenter's Square that they show in the Owner's Manual for setting up your saw.
                      An accurate Carpenter's Square is almost a myth!
                      A good one will cost you quite a bit of money, $40 - $75, or more. I would recommend that you consider using a pair of Draftsman's 30 -60 and 45 degree triangles instead. You'll find they're not near as expensive and are far more accurate than a run-of-the-mill Carpenter's Square. The 30 -60 triangle should have one 12" leg and the other leg would be 9" long. The 45 degree triangle should have at least 8" legs on either side of the 90 degree corner. That way either one can be put up against the side of the Saw Blade without touching the saw teeth.

                      Just remember, regardless of which measuring instrument you choose to use, check it(them) to be sure they're accurate. When checking the Miter Fence for Square to the Blade with a triangle, use the 12" 30-60, if possible.

                      One of the other "tricks" that I've discovered is to take a piece of "Wax" paper, fold it several times and rub it in the grooves that the "T" nuts that lock your Rails in place ride in. Makes the Rails move smooth as Butter.

                      Last, but not least, don't forget to paint the RED line!
                      It's a line that extends the line-of-sight from the saw blade to the front edge of the table to remind you NOT to let your Miter Fence or your FINGERS get in the way of the saw blade. Just put red paint, nail polish, or what ever, in the grove that extends towards the operator from the front edge of the saw blade.



                      Stop thinking why you can't and Start thinking how you CAN!
                      Remember, SUCCESS comes in CANS!
                      George

                      Comment

                      Working...