Do you wear a dust mask?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • TheHinge
    Forum Newbie
    • Aug 2005
    • 32
    • Georgia, USA.

    #1

    Do you wear a dust mask?

    I read somewhere that dust can be very dangerous to your health if inhaled. Is that true? Does it depend on the wood being cut? Do you wear a dust mask? I read the warning on a page about routers, but I figured it applied to all tools and woodworking.

    Thanks.
  • gerti
    Veteran Member
    • Dec 2003
    • 2233
    • Minnetonka, MN, USA.
    • BT3100 "Frankensaw"

    #2
    Lon-term all dust is quite dangerous. Short term it depends on the wood and the individual. Some people react strongly to certain woods, others do not. This page has some info:

    http://www.houseoftools.com/content/...n/WoodDust.htm

    Gerd

    Comment

    • monte
      ***** Windbag
      • Dec 2002
      • 5242
      • Paw Paw, MI, USA.
      • GI 50-185M

      #3
      Especially when sanding I'll use a mask.
      Monte (another darksider)
      Reporting Live from somewhere near Kalamazoo

      http://community.webshots.com/user/monte49002

      Comment

      • Johnny B
        Forum Newbie
        • Mar 2003
        • 51
        • Camp Pendleton, Ca, USA.

        #4
        My pops bought me the Trend "Airshield" for my birthday last Feb. I do almost everything with it on... A bit pricey though..

        Comment

        • Pappy
          The Full Monte
          • Dec 2002
          • 10490
          • San Marcos, TX, USA.
          • BT3000 (x2)

          #5
          I work outside and rarely wear a dust mask although I admit that I should.
          Don, aka Pappy,

          Wise men talk because they have something to say,
          Fools because they have to say something.
          Plato

          Comment

          • jhart
            Veteran Member
            • Feb 2004
            • 1715
            • Minneapolis, MN, USA.
            • BT3100

            #6
            I wear one when sanding, otherwise, I generally don't.
            Joe
            "All things are difficult before they are easy"

            Comment

            • rbfunk
              Established Member
              • Dec 2003
              • 400
              • Garfield, NJ, USA.

              #7
              I should wear mine more often. I do put one for sanding and anything to do with MDF. I should also wear safety goggles over my glasses more often then I do or get sode pieces.
              I sould be wearing one right now. A lot of dust comees off the coffee when roasting but standing next to a 400 deggree+ 50K btu oven, the mask would really get the sweat going. Plus it might scare the customers.
              Bob
              Oh what a tangled web we weave, when we are all hopped up on caffine.

              Comment

              • mattc183
                Established Member
                • Jul 2005
                • 103
                • enid, oklahoma, USA.

                #8
                about as often as I wear my ear plugs[)]

                mattc
                \"...for I know one thing, and that is that I know nothing.\"
                -Socrates

                Comment

                • drumpriest
                  Veteran Member
                  • Feb 2004
                  • 3338
                  • Pittsburgh, Pa, USA.
                  • Powermatic PM 2000

                  #9
                  I have some rather severe allergies, and therefore have purchased a replacable cartridge dust mask suitable for paint application. I use if quite often, though the filters are overdue for a change. I also try to do most of the messy stuff (dado routing and sanding) outside, which significantly cuts down on the exposure.

                  Earplugs are in ALL of the time.

                  Keith Z. Leonard
                  Go Steelers!

                  Comment

                  • John Hunter
                    Veteran Member
                    • Dec 2004
                    • 2034
                    • Lake Station, IN, USA.
                    • BT3000 & BT3100

                    #10
                    I wear one when using the planer and when sanding.
                    John Hunter

                    Comment

                    • MBG
                      Senior Member
                      • Apr 2003
                      • 945
                      • Chicago, Illinois.
                      • Craftsman 21829

                      #11
                      I usually wear one when sanding, but, based on the looks of my air filtration inlet filter I probably should have it on more often.

                      Since I have started spending more time in the shop/garage over the past 3 years I added a DC, air filtration system, and a replaceable cartridge face mask.

                      Comment

                      • Rounder
                        Veteran Member
                        • Jan 2003
                        • 1287
                        • Sanford, FL, USA.
                        • BT3100

                        #12
                        I wear one most of the time.
                        George AKA Rounder

                        "Amarillo Slim, the greatist proposition gambler of all time held to his father's maxim; You can shear a sheep many times, but you can skin him only once."

                        Comment

                        • JimZ
                          Forum Newbie
                          • Jul 2005
                          • 16
                          • Ballston Lake, NY, USA.

                          #13
                          I wear one very frequently now. Haven't had any serious problems, thank goodness, but it took me forever to figure out (duh!) that my frequent stuffy noses (lasting oh, 36 hours or so) happened every time I made sawdust, dust collection or no dust collection.

                          I'm not sure what I put into my lungs (don't wanna' think about that), but I use a mask faithfully now when using the TS, planer, router, or either sander. I enjoy woodworking too much to risk developing a significant allergy to it -- something that can happen if you're exposed to something you're sensitive to.

                          I do remember reading that anyone working with mesquite is strongly advised to wear a mask. It said that mesquite can raise an allergy in just about anyone. And I suspect there may be others in the exotic wood category that may also do it. Some can be very bad under rare circumstances, sassafras for example. And I remember being cautioned about what stick to use as a spit over a fire -- oleander can be very dangerous.

                          If you wnat more reasons to wear a mask, see http://www.gvwg.ca/docs/Articles/WoodToxicity.htm

                          I don't vouch for the accuracy of the information on the above site, but I for one don't choose to take chances. Of course, I'm fortunate to have a basement shop, cool enough even in the summer to tolerate a mask

                          YMMV, but best play it safe, don't you think ?

                          Comment

                          • Bob Webb
                            Established Member
                            • Feb 2003
                            • 262
                            • Garland, TX.

                            #14
                            quote:Originally posted by TheHinge

                            I read somewhere that dust can be very dangerous to your health if inhaled. Is that true? Does it depend on the wood being cut? Do you wear a dust mask? I read the warning on a page about routers, but I figured it applied to all tools and woodworking.

                            Thanks.
                            I work with alot of exotic woods such as Purpleheart, Padauk, Brazilian Cherry, Luptus, Black Walnut, Maple, and Cherry and after reviewing several posts quite some time ago (pre-BT3Central days) I started wearing one all of the time. It is the first thing I put on when I start anything.

                            My brother has severe asthma. He came over one day to help me one a project. By the time we finished just rough cutting the wood he could not breathe. That just reinforced my wearing a mask.

                            You may not notice anything short term but I worry more about long term. Not worth the chance.

                            Comment

                            • Sid
                              Established Member
                              • Apr 2004
                              • 139
                              • Bloomington, IL, USA.
                              • Craftsman 22124

                              #15
                              I really like my Resp-o-rator, and wear it for anything that raises any dust. Unlike some of the alternatives, it causes no leaks with my beard, doesn't fog my glasses, and is quite comfortable.

                              http://www.duxterity.com/

                              My only connection is that of a satisfied user.

                              Sid

                              Comment

                              Working...