Rocking Horse

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • thrytis
    Senior Member
    • May 2004
    • 552
    • Concord, NC, USA.
    • Delta Unisaw

    #1

    Rocking Horse

    I finally finished the rocking horse for my daughter. It is hard maple, walnut, and cherry, finished with a coat of sealcoat and several coats of lacquer. The plans are from Family Tradition.

    I made so many mistakes on this project that i lost track of them, from blowouts while routing to a screw head breaking off. Fortunately i was able to repair or conceal most of them, though some still show. I realized part way through this project that it was beyond my skill level, but considering that i'm fairly happy with how it turned out. A couple of things turned out better than i was expecting though, like the saddle which i didn't have a bandsaw to help shape.

    It is about a month late since it was a Christmas present. On Christmas eve it was done except for some detailed sanding, finishing the booster step, and the finish, so it was under the tree Christmas morning. I worked much slower after Christmas, so i only completed it yesterday (about two months total time).

    Thanks for all of the suggestions for reducing router blowouts.

    In use on Christmas:



    Finished:

    Eric
  • GPA61
    Senior Member
    • Sep 2004
    • 712
    • Rancho Cucamonga, CA
    • BT 3100 & JET JWTS

    #2
    Beautiful work Eric.
    Claudio

    Comment

    • John Hunter
      Veteran Member
      • Dec 2004
      • 2034
      • Lake Station, IN, USA.
      • BT3000 & BT3100

      #3
      Very nice!
      John Hunter

      Comment

      • Alex Franke
        Veteran Member
        • Feb 2007
        • 2641
        • Chapel Hill, NC
        • Ryobi BT3100

        #4
        It's beautiful! And she looks delighted!

        I've made a couple of them -- same species, different design. If you do it again it will go a *lot* smoother, so don't be discouraged!

        I think we have the same fireplace tools. :lol:

        Great work!
        online at http://www.theFrankes.com
        while ( !( succeed = try() ) ) ;
        "Life is short, Art long, Occasion sudden and dangerous, Experience deceitful, and Judgment difficult." -Hippocrates

        Comment

        • Pappy
          The Full Monte
          • Dec 2002
          • 10490
          • San Marcos, TX, USA.
          • BT3000 (x2)

          #5
          Great looking horse, and it doesn't look like she minded that it wasn't quite finished!
          Don, aka Pappy,

          Wise men talk because they have something to say,
          Fools because they have to say something.
          Plato

          Comment

          • hermit
            Established Member
            • Dec 2002
            • 379
            • Somerset, PA, USA.

            #6
            Wow that looks great. The finish really brings out the color variation in the woods. You sound like me...... pointing out mistakes when no one else will know! Keep you're mouth shut about that stuff! I'm still trying to learn to do that myself.

            Todd

            Comment

            • SHADOWFOX
              Veteran Member
              • May 2005
              • 1232
              • IL, USA.
              • DELTA 36-675

              #7
              Wow! The smile on that face says it all. Great work and thank you for sharing!
              Chris

              "The first key to wisdom is constant and frequent questioning, for by doubting we are led to question and by questioning we arrive at the truth." -Pierre Abelard 11th Century philosopher.

              Comment

              • drumpriest
                Veteran Member
                • Feb 2004
                • 3338
                • Pittsburgh, Pa, USA.
                • Powermatic PM 2000

                #8
                Looks great! You have concealed any such issues well enough for web work, which is usually well enough for anyone who is looking at it. Great job!
                Keith Z. Leonard
                Go Steelers!

                Comment

                • lrogers
                  Veteran Member
                  • Dec 2002
                  • 3853
                  • Mobile, AL. USA.
                  • BT3000

                  #9
                  Looks to me like you have a VERY happy little "cowgirl". It also looks to me like you expanded your skill level nicely.
                  Larry R. Rogers
                  The Samurai Wood Butcher
                  http://splash54.multiply.com
                  http://community.webshots.com/user/splash54

                  Comment

                  • jhart
                    Veteran Member
                    • Feb 2004
                    • 1715
                    • Minneapolis, MN, USA.
                    • BT3100

                    #10
                    The smile on her face says everything. Nice looking project.
                    Joe
                    "All things are difficult before they are easy"

                    Comment

                    • SARGE..g-47

                      #11
                      It's great... I hardly doubt she has noticed one mistake. Shall we say that "we" are perhaps our own worst critic..

                      Comment

                      • ejs1097
                        Established Member
                        • Mar 2005
                        • 486
                        • Pittsburgh, PA, USA.

                        #12
                        That's the first horse I've seen with raised detailing for the mane and tail...very very nice. The saddle looks like it was very difficult to make and turned out nicely.
                        Eric
                        Be Kind Online

                        Comment

                        • mater
                          Veteran Member
                          • Jan 2004
                          • 4197
                          • SC, USA.

                          #13
                          It is beautiful and she looks very happy with it.
                          Ken aka "mater"

                          " People may doubt what you say but they will never doubt what you do "

                          Ken's Den

                          Comment

                          • footprintsinconc
                            Veteran Member
                            • Nov 2006
                            • 1759
                            • Roseville (Sacramento), CA
                            • BT3100

                            #14
                            Beautiful! i love the saddle. you know, i am always hesitant on trying new projects just because i am afraid that i cant do them. i always over think and then screw up. so dont worry, once you are done, the satisfaction makes up for all that. looks real great!
                            _________________________
                            omar

                            Comment

                            • chopnhack
                              Veteran Member
                              • Oct 2006
                              • 3779
                              • Florida
                              • Ryobi BT3100

                              #15
                              Awesome Eric! Woodworking is not only joinery but selecting good wood - you did just that IMHO with the nice grain characteristics of the maple. Esp. on the second photo right buy the eye! Very nice.

                              I think in straight lines, but dream in curves

                              Comment

                              Working...