Well after a good amount of work, and tons of finishing the bar is done. Feel free to critique it, this is the first bar I have ever build and built it on a small budget.
Build info.
The entire bar is constructed out of pine. The top is 1.5" thick, made from 2 pieces of laminated pine glued together to achieve the 1.5" thickness. The railing around the bar started as a 1x3 pine, that had a 1.5"+ dado made on 1 side that allowed it to slip over the edge of the bar, thus creating a lip for the top. The rest is pine as well. The top was done using EnviroTex Epoxy Resin pour coating, took 3 coats to get it just right.
[IMG][/IMG]
Build info.
The entire bar is constructed out of pine. The top is 1.5" thick, made from 2 pieces of laminated pine glued together to achieve the 1.5" thickness. The railing around the bar started as a 1x3 pine, that had a 1.5"+ dado made on 1 side that allowed it to slip over the edge of the bar, thus creating a lip for the top. The rest is pine as well. The top was done using EnviroTex Epoxy Resin pour coating, took 3 coats to get it just right.
[IMG][/IMG]
Comment