A couple of doors and drawers (not quiet finished)

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • tekton
    Forum Newbie
    • Dec 2005
    • 40
    • Rossville, GA, USA.

    A couple of doors and drawers (not quiet finished)

    Well more like 34 drawers and 61 doors and drawer fronts. I dread sanding these already.
    Attached Files
  • Stan
    Senior Member
    • Mar 2004
    • 966
    • Kalispell, MT, USA.
    • BT3100, Delta 36-717

    #2
    Definitely looks like you have your day scheduled out...

    This a project for your own house? If so, must be a pretty durn good sized project with that many doors/drawers.
    From the NW corner of Montana.
    http://www.elksigndesigns.com

    Comment

    • mater
      Veteran Member
      • Jan 2004
      • 4197
      • SC, USA.

      #3
      It looks like you have been busy. That is a lot of drawers.
      Ken aka "mater"

      " People may doubt what you say but they will never doubt what you do "

      Ken's Den

      Comment

      • lrogers
        Veteran Member
        • Dec 2002
        • 3853
        • Mobile, AL. USA.
        • BT3000

        #4
        Good golly Miss Molly, you have been busy in the shop!
        Larry R. Rogers
        The Samurai Wood Butcher
        http://splash54.multiply.com
        http://community.webshots.com/user/splash54

        Comment

        • RodKirby
          Veteran Member
          • Dec 2002
          • 3136
          • Melbourne, Victoria, Australia.
          • Mao Shan TSC-10RAS

          #5
          Not only a lot of drawers but a whole lot of wood
          Downunder ... 1" = 25.4mm

          Comment

          • Pappy
            The Full Monte
            • Dec 2002
            • 10453
            • San Marcos, TX, USA.
            • BT3000 (x2)

            #6
            Better you than me!
            Don, aka Pappy,

            Wise men talk because they have something to say,
            Fools because they have to say something.
            Plato

            Comment

            • cabinetman
              Gone but not Forgotten RIP
              • Jun 2006
              • 15216
              • So. Florida
              • Delta

              #7
              Now that's a familiar sight. No backin' out now!!

              Comment

              • jgrobler
                Established Member
                • Dec 2005
                • 259
                • Salinas, CA, USA.
                • TS3650

                #8
                That's a lot. About this time a year ago I has a large stack (well, now I thought I had), for 32 raised panels, 11 door fronts, and I still remember what a joy it was to sand. My girls helped out too.

                Your stack looks a lot more than mine was. Have fun!

                Comment

                • crokett
                  The Full Monte
                  • Jan 2003
                  • 10627
                  • Mebane, NC, USA.
                  • Ryobi BT3000

                  #9
                  That sure is a lot. I think I'd either invest in a wide belt sander or take them to a shop that has one and pay them to run them through. What is all that for?
                  David

                  The chief cause of failure in this life is giving up what you want most for what you want at the moment.

                  Comment

                  • bthere
                    Established Member
                    • Jan 2007
                    • 462
                    • Alpharetta, GA

                    #10
                    Are you through yet?

                    Comment

                    • tekton
                      Forum Newbie
                      • Dec 2005
                      • 40
                      • Rossville, GA, USA.

                      #11
                      Well the drawers are finished except for slides. The doors are all assembled and sanded ready for finish. I hate sanding my shop is a total disaster and will probably take longer to clean than it did to sand all the doors and drawers, but I feel good now that it's all over.
                      Attached Files

                      Comment

                      Working...