This mahogany bar was fun to build. Overall it stands about 10ft high, including the header which is about 20ft long x 12" high. The main overhead header is about 5ft in diameter, and the double bullnose mouldings are 1 1/2" each for a 3" pair. There is a corresponding header on the opposing wall with a 30" clear hole through both headers for a potted tree to extend through. The decorative filler on the bar and header is hammered copper and brass (by others). The trick to this bar was the curved bullnoses and half rounds made on a curve. The edging on the bartop is a double 2" bullnose. The finish is a NGR red mahogany methanol based stain with clear lacquer finish.
"I'M NEVER WRONG - BUT I'M NOT ALWAYS RIGHT"
"I'M NEVER WRONG - BUT I'M NOT ALWAYS RIGHT"
Comment