Air floataion table

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Carpenter96
    Established Member
    • Aug 2011
    • 178
    • Barrie ON Canada
    • BT 3000

    Air floataion table

    Hi I was wondering if any one could tell me what the size of this table was/is? Regards Bob
  • pelligrini
    Veteran Member
    • Apr 2007
    • 4217
    • Fort Worth, TX
    • Craftsman 21829

    #2
    I think it was about 42", the length of a long table kit.
    Erik

    Comment

    • Carpenter96
      Established Member
      • Aug 2011
      • 178
      • Barrie ON Canada
      • BT 3000

      #3
      Air Floatation Table

      Thanks Erik. Does anyone know what the width was? Regards Bob

      Comment

      • vaking
        Veteran Member
        • Apr 2005
        • 1428
        • Montclair, NJ, USA.
        • Ryobi BT3100-1

        #4
        I don't have flotation table but I know it is supposed to fit between rails on BT3100 and distance between rails is 22.5". So table width should be just short of 22.5" to fit. You can probably use your accesory table on BT3100 as a guide - width should be same.
        Last edited by vaking; 08-26-2011, 02:10 PM.
        Alex V

        Comment

        • Carpenter96
          Established Member
          • Aug 2011
          • 178
          • Barrie ON Canada
          • BT 3000

          #5
          Air floatation table

          Thanks Alex. I am in the process of building acabinet for my BT 3000 and have the wide table rails but not the table. Regards Bob Mcdermid

          Comment

          • pelligrini
            Veteran Member
            • Apr 2007
            • 4217
            • Fort Worth, TX
            • Craftsman 21829

            #6
            Have you located a flotation table? I don't see them available all that often anymore. I think they were pretty heavy. That might have been the fold down outfeed table though. A few times I saw offerings the seller didn't want to try to ship it.

            I've used some Phenolic coated ply from Woodcraft for my router table insert. It is a pretty slick surface and even slicker when waxed. http://www.woodcraft.com/Product/200...x-24-x-48.aspx
            Erik

            Comment

            Working...