adjusting sliding miter table

[slieber967]

trying to adjust sliding miter table ,looked on the underside and have 4 eccentric screws, no silver screw. is the silver screw key number 34 ,of fig.5, page 39 of the bt3000 manual a hardware store item? i would hate to order one screw. can i adjust the table with the eccentric screw in place?

thanks
kc
slieber967@aol.com

[Black wallnut]

The silver or non-eccentric is not a hardware store item. Yes you could adjust with having four eccentric screws. Just set the front right to about mid adjustment, adjust with the rear right for parallel and both left for slop to base. Be sure to review my article on SMT glides if you need pics.