I'm new here at BT3 Central and searched for outfeed tables but did not find to much. Anyone out there have plans or ideas to build an outfeed table for my BT3 ?
Ole
Ole
-
-
Try This
I used a hole core door and some T-Nuts.
Mike
"It's not the things you don't know that will hurt you, it's the things you think you know that ain't so." - Mark Twain -
outfeed table......
I made a hinged (flip up) outfeed table for my saw, an I use a straight board at 45 deg. angle to keep it up in place when I need to use it. eezlockComment
-
This is a page from one of the members here, so all the credit naturally goes to him, whoever he may be since I don't remember (my apologies).
http://www.gugie.com/house/cheap_BT3...feed_table.htm
This is the one I plan to build if I ever get time.JoeComment
-
joey, thanks for the link! i have been looking for an idea for a while and i could find one with the bt3 in. so i modified one that i saw on another cabinet saw (folding one). i have it half way drawn, so didnt get to finish it. now with this one, i may just scrap my drawing and just follow this one. once again, thanks!_________________________
omarComment
Comment