Accessory table router inserts

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Popeye
    Veteran Member
    • Mar 2003
    • 1848
    • Woodbine, Ga
    • Grizzly 1023SL

    #1

    Accessory table router inserts

    Has anyone made inserts for the accessory table? I've been using the plastic flimsy ones from the accessory kit for three years. Been groweling about them for three years too.
    Not having a big project for the day I think I may give making some substantial ones a try. Would be nice to have some that are level and solid.
    Ideas and or comments are welcome. Pat
    Woodworking is therapy.....some of us need more therapy than others. <ZERO>
  • Popeye
    Veteran Member
    • Mar 2003
    • 1848
    • Woodbine, Ga
    • Grizzly 1023SL

    #2
    Ok, here is a couple of hours playing around with scrap. Played with 1/2" and 1/4". 1/4" is more than stiff enough to make the inserts. Re-sawed the 1/2" inserts down to alittle over 1/4" thick.

    Pat
    Woodworking is therapy.....some of us need more therapy than others. <ZERO>

    Comment

    • wreckwriter
      Established Member
      • Mar 2006
      • 449
      • South Florida
      • BT3100-1

      #3
      How are you cutting the round pieces? Hole saw?
      http://www.wreckwriter.com/

      Comment

      • Popeye
        Veteran Member
        • Mar 2003
        • 1848
        • Woodbine, Ga
        • Grizzly 1023SL

        #4
        Originally posted by wreckwriter
        How are you cutting the round pieces? Hole saw?
        One of these http://www.rockler.com/product.cfm?p...ircle%20cutter in a DP. Then I sneak up on the correct rabbet depth with a straight bit in the router table. Pat
        Woodworking is therapy.....some of us need more therapy than others. <ZERO>

        Comment

        • wreckwriter
          Established Member
          • Mar 2006
          • 449
          • South Florida
          • BT3100-1

          #5
          We used to use similar thing to cut round holes in aircraft skin. We called it a "fly cutter".
          http://www.wreckwriter.com/

          Comment

          • sacherjj
            Senior Member
            • Dec 2005
            • 813
            • Indianapolis, IN, USA.
            • BT3100-1

            #6
            Looks like it was done with a circle cutter. Drill bit in the middle and an adjustable cutting arm for the diameter.

            Edit: The posts between reading and responding always beat me...
            Last edited by sacherjj; 05-12-2006, 12:26 PM.
            Joe Sacher

            Comment

            • wreckwriter
              Established Member
              • Mar 2006
              • 449
              • South Florida
              • BT3100-1

              #7
              What I would like is one with no hole. I guess the easiest would be to just fill an existing hole with epoxy or something.
              http://www.wreckwriter.com/

              Comment

              • Popeye
                Veteran Member
                • Mar 2003
                • 1848
                • Woodbine, Ga
                • Grizzly 1023SL

                #8
                Originally posted by wreckwriter
                What I would like is one with no hole. I guess the easiest would be to just fill an existing hole with epoxy or something.
                Could be turned. My fly cutter can be used without the center drill bit. Pat
                Woodworking is therapy.....some of us need more therapy than others. <ZERO>

                Comment

                • Popeye
                  Veteran Member
                  • Mar 2003
                  • 1848
                  • Woodbine, Ga
                  • Grizzly 1023SL

                  #9
                  What is that you're working on in the picture Joe? I can't get it clear enough to tell. And BTW you taking care of my home town? Pat
                  Woodworking is therapy.....some of us need more therapy than others. <ZERO>

                  Comment

                  • sacherjj
                    Senior Member
                    • Dec 2005
                    • 813
                    • Indianapolis, IN, USA.
                    • BT3100-1

                    #10
                    Originally posted by Popeye
                    What is that you're working on in the picture Joe? I can't get it clear enough to tell. And BTW you taking care of my home town? Pat
                    That is a steadicam rig. It goes on like a hiking backpack and you fly the camera around. You can get steady video while running. In my spare time, I do professional photogrpahy and video work, as well as being the Director of Photography for an Independet Film company.
                    Joe Sacher

                    Comment

                    Working...