Tweet
Where to buy angle aluminum??
I am making Rod's miter slot and the plans call for 2 and 3/8ths aluminum angle for the front and rear brackets. I am having a devil of a time finding it. I don't want to spend a fortune getting one custom made and the normal channels only go up to 2". Any ideas?
-
Howard, the Plano BT3'r.
Confucious say, "Man who get too big for britches will be exposed in the end."
I didn't attend the funeral, but I sent a nice letter saying I approved of it."
- Mark Twain -
Around here in NW Florida, the Blue and Orange Box stores carry it. So does ACE and TruValue stores.Bob Bassett from Northwest Florida -
Thanks for the quick response. I looked at HD and Lowes here locally, (Dallas) and they only went out to 2". BTW, hang around their panel cutter and there's no telling what you can pick up for free. I got a very nice piece of MDF, about a 3 x 3 sheet, for free!Howard, the Plano BT3'r.
Confucious say, "Man who get too big for britches will be exposed in the end."
I didn't attend the funeral, but I sent a nice letter saying I approved of it."
- Mark TwainComment
-
I'm not sure what you are looking for. Are you looking for T-tracks, U-shape channel aluminum or L-shape aluminum angle?
If you are looking for small pieces, try
http://stores.ebay.com/8020-Inc-Gara...Z2QQpZ15QQtZkm
Good luck.
________
Find HeadshopLast edited by newbie2wood; 09-15-2011, 04:55 AM.Comment
-
onlinemetals.com
they carry them and specialise in small quantity
--rajComment
-
It would take about 10 seconds with a shear and brake to fabricate. Most of the metal shops around here would do it while you wait, for the price of a 6-pack....eight, nine, TEN! Yep! Still got all my fingers!Comment
-
Check the local phone book under Metal Suppliers. I get mine from Westbrook Metals in Austin.Don, aka Pappy,
Wise men talk because they have something to say,
Fools because they have to say something.
PlatoComment
-
I'd keep an eye out for a local supplier to (maybe) save on shipping, but I have to second the suggestion for http://www.onlinemetals.com/
I've used them several times and they've been great to deal with. I've found I can usually get what I want cheaper than buying at HD/Ace/True Value...even with shipping.
One tip: Be careful when buying aluminum angle. Some has a curved radius on the inside corner and some does not. Sometimes that makes a big difference depending on your intended use, DAMHIK.
Last edited by mschrank; 12-18-2008, 02:24 PM.Mike
Drywall screws are not wood screwsComment
-
Found it! There is franchise called Metal Supermarkets and they specialize in small amounts. http://www.metalsupermarkets.com/. Had just what I was looking for and at a bargain price. Going there tomorrow...Howard, the Plano BT3'r.
Confucious say, "Man who get too big for britches will be exposed in the end."
I didn't attend the funeral, but I sent a nice letter saying I approved of it."
- Mark TwainComment
-
Great Source!!
You know, I would have suggested them except I thought they were a local company up here in Edmonton. Learn something everyday.Originally posted by Howard
They are a great source BTW.Brian
Welcome to the school of life
Where corporal punishment is alive and well.Comment
-
Since you've found it I did not look but I typically start with www.mcmaster.com for this kind of stuff. They have a large inventory of fasteners and all kinds and shapes of metal at fair prices.
JimComment
-
Made it down there today. Cut two 6 inch pieces just like Rod specified. A whopping $6.12. This was well worth the research as I was resigned to have buy $40 to $50 and have a lot left over. I think this internet thing is here to stay...
Howard, the Plano BT3'r.
Confucious say, "Man who get too big for britches will be exposed in the end."
I didn't attend the funeral, but I sent a nice letter saying I approved of it."
- Mark TwainComment
Comment