BT3 only special on drawer slides until 10/31

[Ishmel]

I'd like to start by saying that I've read the forum rules regarding bargin alerts of affiliated people and I think that this post is within the rules, since I am not gaining financially. If I'm mistaken I'll be happy to take the post down or have a mod delete it. That said, the company offering the deal is run by my brother-in-law. Here's the deal:

KV8450 Series Drawer Slides
The soft close feature brings the drawer box to a smooth, quiet, secure close. Exceptionally smooth and quiet performance. A very high quality slide!

Load Rating: 100#
Side Clearance: 1/2" + 1/32" - 0
Mounting: Side for frame and frameless
Side Height: 1-13/16"
Full 32 hole pattern
Lever disconnect for easy drawer removal
Steel ball bearing. (Three bearings per inch of race.)
Ball retainer latch and ramps for easy drawer insertion
Non-handed
Drawer member setback minimum 1/8" from back of drawer front
Anochrome
Lacquer top coat

Prices are:

12, 14, 16 and 18 inch - $15 a set plus shipping
20, 22, and 24 inch - $15.50/set plus shipping
26 and 28 inch - $16/set plus shipping

Shipping is:

On orders $20 and less = $6.95
$20.01 to $50 = $8.45
$50.01 to $100 = $10.45
anything over $100 = $12

Please post, email, or PM me with questions or comments

Don

[SwingKing]

FYI, if anyone's interested, here's the link to the manufacture's site: http://www.knapeandvogt.com/8450_Sof...ge=details.664

Don's description actually has more info than this page, but it does have a couple pictures and a PDF with the mounting profile. It does look this is a reasonable deal. From what I found, these are a couple dollars cheaper per set and shipping is less than the places I found that carried them.

-- Ken

[Ishmel]

FYI, if anyone's interested, here's the link to the manufacture's site: http://www.knapeandvogt.com/8450_Sof...ge=details.664

Don's description actually has more info than this page, but it does have a couple pictures and a PDF with the mounting profile. It does look this is a reasonable deal. From what I found, these are a couple dollars cheaper per set and shipping is less than the places I found that carried them.

-- Ken

Thanks for the link and the props Ken. I'll be sure to get another deal from him for November. Anyone want to make a request?