BT3100's

[eezlock]

NOTICE to all

I was in Home Depot in Charlotte last night(08/26/2006) and talked to the store manager,he informed that they have in stock (3) new BT3100's even pulled up the info. on store computer to confirm it,for $249.00.If anyone needs or wants one, it is the store on South Blvd.The address is 2707 South Blvd. Charlotte,N.C. phone # (704) 522-8123. Sorry, didn't ask about accessory kits or anything else concerning this saw, but it is a place to start if someone needs a saw. Couldn't wait to get this posted, kinda' excited...
don't see this kind of info. around to much lately!
good luck to all....eezlock

[wmartins]

They also have at least one in a box at HD of Margate, FL (441 and Wales Rd.) . Same price.

[430752]

Cheaper in Jersey

One of the BORGs local to my work, in woodbridge (route 9), has a bt3100 for $239.

One of the Borgs local to home, east hanover (rt 10), has the accessory kit for $79. Since I already have one, didn't think it worth it at $79 since I guess I only really need the table?

Anyway, haven't been to other local ones recently (rahway, colonia, edison, bloomfield, totowa, west caldwell/pinebrook, union/vauxhall). People around the area might get lucky if need be,

Also, an interesting bit: before the disco of the 3100, each store I went to must have had at least one accessory kit, maybe 2 or 3. Now, they're all gone. I know this site has been successful in publicizing the bt3100, but not like that!

Also, interesting bit#2: high up on the racks, on the tip-top shelf in the East Hanover store, was a pallet of "Ryobi 10" Portbale Table Saws" but with an open leg stance kinda like the bt3x00. But, it didn't look like the bts15 or 20. Of course, since it was way high up wrapped in plastic and labels, I can't be too sure, but didn't look like it. Further, I found a bts15 and 20 boxed-up, and the boxes looked a bit different - but again can't be sure since it was way high up and wrapped. I couldn't get a model number off the box from my low angel and due to the labels. Still, might be something?

Curt J.

[OhYea]

The HD in Beavercreek, Ohio has a floor model for $200 labeled "Last One". Looks in OK shape but I would inspect it for missing parts.

[buddyroo]

BT3100 Box

I just bought a new BT3100 from the Borg, $175, and still have the box. The BT3100 model # is on the top right corner of all four sides of the box. Each side also says "10" Precision Woodcutting Table Saw" in white letters across the bottom. I experienced the same problem trying to identify saws up in the stacks, so I hope this helps.

[ssmith1627]

Looks like the BT3100's are disappearing here in Knoxville as well. One of our stores now just has the display model left, still asking $239, and marked as "Last One".

The other store still had one in box and the display but sure looks like we're close to the end now.

Steve