Habor Freight Clearance DEALS!!

[Woodwerker]

Guys this may only be at the Norristown PA store but check you local store.
I got a Gift Card from HF yesterday for signing up and using their credit card.
It was $100 card so I took a ride to there this morning.
First it was nice to shop without the weekend crowds :-)
I found some great clearance deals.
1) Picked up two rechargeable 500K candle power flash lights for $2 each normally $15

2) Also got a 100' 4 outlet power station for $10 was $30

3) The best deal was a 14"X40" Lathe for $30 yes $30 NIB It was the $139 unit

Also got 4 heavy duty 18" clamp-spreaders for $2 each

These were all tagged with yellow clearance tags and there were other items as well. They were on the regular shelves not in the clearance section.

Used a 20% coupon so the lathe ended up costing $24 :-)

With other items I spent $102 so walked out only spending $2.04
Nice trip :-)

[jp_spins]

is the price on the lathe advertised anywhere, if not can you post a copy of the receipt? thanks

[Knottscott]

A $24 lathe deserves a "YOU SUCK!", but I don't know if they do that around here so I'll refrain.

Excellent deals!

[Woodwerker]

Guys I dont have a scanner.
But here is the model # 36066
And the store was the Norristown PA location, here is the phone number 610-277-1955
If your store has one and they need the reciept I will copy it and mail it to you.
Joe

[davidtu]

If you have a digital camera, you can take a photo and post that.

[JR]

A $24 lathe deserves a "YOU SUCK!", but I don't know if they do that around here so I'll refrain.

We do and it does!

[Chadwick]

Nice haul man!!

Chadwick

[91FE]

Hmmm... wonder where I'll be tomorrow? I've got a meeting that'll be taking me past the NE Philly store. If they don't have it... I'll hit Norristown on my way home. Thanks for the heads up!

edit: was there another one in Norristown?

Scott

[Woodwerker]

Scott, they told me that they had a "few" more.
I was tempted to pick up another to sell on Ebay
Good Luck
Joe

[Ken Massingale]

Is this the lathe?
http://www.harborfreight.com/cpi/cta...emnumber=45276

It's the only $139 one I found.
ken

[Woodwerker]

Thats it, just an older model.
I put it together last night and tried my hand at turning.
Needs Improvment

[Ken Massingale]

If it's got the same spindle as the 45276 which I had, it is I believe a 3/4" by 16 tpi. You will need an adaptor to use 1 by 8tpi or 3/4 by 10 tpi common chucks, etc. It's not a terrible lathe, the steel tube bed will flex if you tighten the headstock too tight. Still, you stole it.
ken

[jp_spins]

I just called the Sharon Hill, PA store, they only have the display model and the price was $134.99

[jp_spins]

I just got the last one at the Norristown store, I called a buddy who lives near the store, he went there and they only had 2 dsiplay models left, so we got them.