AP-10 Question

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • tommyt654
    Veteran Member
    • Nov 2008
    • 2334

    #1

    AP-10 Question

    I know I can buy a new Ryobi 13 1/2 inch planer @ H.D. for about $188, what would a used fairly good shape AP-10 be worth. I,m thinkin $65-75 tops any thought on a 20 yr old planer value?
  • Uncle Cracker
    The Full Monte
    • May 2007
    • 7091
    • Sunshine State
    • BT3000

    #2
    I wouldn't be in a great hurry to get a new AP-1301. While not bad for a "value" planer, it is not nearly the planer that its predecessor (the AP-1300) was. The lack of a cutterhead lock is a big step backward. For the same $200, you can get much better planers in good used condition, if you're patient and keep your eye on the CL ads.

    Comment

    • Cochese
      Veteran Member
      • Jun 2010
      • 1988

      #3
      You saw that CL ad too, eh?

      I'd skip the 1301 as well. The lack of the cutterhead lock is why I waited on a 1300. Now if I only had time to use it...
      I have a little blog about my shop

      Comment

      • JimD
        Veteran Member
        • Feb 2003
        • 4187
        • Lexington, SC.

        #4
        I paid $100 for a used AP-10 a couple years ago. The blades were very dull but it came with the infeed/outfeed rollers and the blade sharpening and setting gauges. I did not think the deal was cheap but I thought it was fair. I sharpened the blades and bought an extra set and planned a bunch of boards.

        Jim

        Comment

        • toolguy1000
          Veteran Member
          • Mar 2009
          • 1142
          • westchester cnty, ny

          #5
          if you're interested, this 2004 article from popular woodworking reviewed the ryobi, among others:

          http://www.popularwoodworking.com/fe...aners.0204.pdf
          there's a solution to every problem.......you just have to be willing to find it.

          Comment

          • DustyandLefty
            Forum Newbie
            • Mar 2006
            • 74
            • Almost West Virginia
            • BT3000 w/ side and rear tables on wheels, BT3100 portable spare, old Delta contractor's

            #6
            Fifty?

            Maybe $65 for a working AP10 if you're selling it; maybe $50 if you see one to buy. If you're the buyer, see if it has a spare set of blades and the blade setting jig. You could ask to run a board through the planer to see if there are nicks in the blades and if the feed rollers still work.

            Ryobi made an optional dust collector cover for the AP10 to which you could hook up a wet/dry vac. That is a valuable addition if the planer comes with one or if you can find one. One of my two AP10s has one, and it allows me to work inside and save the chips for garden mulch.

            They were good little planers, and I think the AP10 was the first of the portable planers made by anyone.

            D&L

            Comment

            Working...