Lets Make A List

[Shep]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Squares
#43 Lunchbox
#44 Center finding drill bit set (like for hinges)
#45 5 more toolboxes to haul items 1-44

[Wood_workur]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Squares
#43 Lunchbox
#44 Center finding drill bit set (like for hinges)
#45 5 more toolboxes to haul items 1-44
#46 Compound sliding miter saw

edit- I'm a little concerned about hauling items #11 and #32 in toolboxes.

[cabinetman]

Looking at the list, you guys did a great job and put a lot of thought into putting together a list...so far. If you think it's done, you may have to make a trip back to the shop. DAMHIKT.

What does this list also represent? It puts our brains to work thinking our way through every step to install, and hopefully not missing anything.

Here's more to think about. In looking at the list, does it make you think you have cleaned out your shop? Would you already have these items? Going along with the amount of tools and supplies so far, think about how those items will be carried to the jobsite, carried in, and carried out. What kind of toolboxes, buckets, bags, crates will you need to put some order to what gets taken?

Just a bit of significant rambling.
.

[gsmittle]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Squares
#43 Lunchbox
#44 Center finding drill bit set (like for hinges)
#45 5 more toolboxes to haul items 1-44
#46 Compound sliding miter saw

edit- I'm a little concerned about hauling items #11 and #32 in toolboxes.

I don't know about the rest of you, but with all the pointy/sharp/powered stuff here, I'm gonna need a First-Aid Kit. Large. With extra Band-Aids…

g.

[chopnhack]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Squares
#43 Lunchbox
#44 Center finding drill bit set (like for hinges)
#45 5 more toolboxes to haul items 1-44
#46 Compound sliding miter saw
#47 stud finder/magnet

[Stytooner]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)

I edited out number 42 squares. We had that twice.

[pierhogunn]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)

[pelligrini]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)

[bloomingtonmike]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)
#50 Furniture Moving Blankets

[bruce hylton]

Piano dollie to move everything in and out on.

[Rand]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set[/QUOTE]
#41 Countersink(s)

[pelligrini]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)
#50 Furniture Moving Blankets
#51 Countersink(s)
#52 Wood Glue

Almost had to make a trip back to pick up the simplest thing.

[Stytooner]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)
#50 Furniture Moving Blankets
#51 Countersink(s)
#52 Wood Glue
#53 Lacquer thinner and acetone

[cabinetman]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)
#50 Furniture Moving Blankets
#51 Countersink(s)
#52 Wood Glue
#53 Lacquer thinner and acetone
#54 Hand truck

[Stytooner]

#1. Cordless drill(s)
#2. Clamps
#3. Levels - 2', 4' and 8'.
#4. shims
#5. Painter's tape
#6. Pencil
#7. Scribe
#8. Large contractor trash bags (the heavy duty 55 gallon size)
#9. Belt sander w/ medium belts (To fine tune cabinets to the scribe lines)
#10 Squares
#11 Helper
#12 Tape measure
#13 Sabersaw
#14 Coffee, lots of coffee
#15 Hole saws
#16 Safety glasses
#17 Portable compressor
#18 Impact driver
#19 Sawzall
#20 Air hoses
#21 Screwdriver set w/ drivers for all the screws used.
#22 Hammer
#23 Nail guns w/nails (finish type)
#24 Block plane
#25 Touch-up color and finish
#26 Dead blow hammer
#27 Corded drills (3/8" & 1/2")
#28 Set of Nail sets
#29 Pliers (large slipjoint included)
#30 watch
#31 Shop vac
#32 Trailer
#33 Trim Router, w/ flush cut bearing
#34 Utility Knife
#35 caulk gun/ with caulk of choice
#36 Adjustable preacher's
#37 Nail guns w/nails (brad type)
#38 Ladder
#39 Extension cords
#40 Drill and screw bit set
#41 Handsaw
#42 Lunch box
#43 Center finding drill bit set (like for hinges)
#44 5 more toolboxes to haul items 1-44
#45 Compound sliding miter saw
#46 stud finder/magnet
#47 Crayon/color putty assortment (for nail holes)
#48 Canvas Drop Cloths ( not plastic cause plastic gets slippy)
#49 Hex key set -metric & SAE (for tools & some euro hardware)
#50 Furniture Moving Blankets
#51 Countersink(s)
#52 Wood Glue
#53 Lacquer thinner and acetone
#54 Hand truck
#55 Shop rags, paper towels or both