How long does paint primer take to dry

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • p8ntblr
    Senior Member
    • Jan 2007
    • 921
    • So Cal
    • Craftsman 22114

    #1

    How long does paint primer take to dry

    Planning on doing a little painting Saturday and was hoping to do it all in one day. If I primer in the morning, will it be dry by the afternoon to paint?
    -Paul
  • maxparot
    Veteran Member
    • Jan 2004
    • 1421
    • Mesa, Arizona, USA.
    • BT3100 w/ wide table kit

    #2
    Originally posted by p8ntblr
    Planning on doing a little painting Saturday and was hoping to do it all in one day. If I primer in the morning, will it be dry by the afternoon to paint?
    That is dependant on the paint, if it's thinned, what it's thinned with, how it's applied and the weather.
    Best advise is to follow the paint manufacturers recommendations.
    Opinions are like gas;
    I don't mind hearing it, but keep it to yourself if it stinks.

    Comment

    • Uncle Cracker
      The Full Monte
      • May 2007
      • 7091
      • Sunshine State
      • BT3000

      #3
      It takes exactly one hour longer to dry than you have...

      Comment

      • jking
        Senior Member
        • May 2003
        • 972
        • Des Moines, IA.
        • BT3100

        #4
        Are you painting indoors or outdoors? I know several people who swear by oil-based primer for exterior projects. The oil-based primers generally take much longer to dry before top coat. If you are doing interior paint with latex primer, you should be able to top coat within a couple of hours. Read the cans & stick to their recommendations.

        Comment

        • docrowan
          Senior Member
          • Mar 2007
          • 893
          • New Albany, MS
          • BT3100

          #5
          I've been painting my shop, which is made of T-111 siding and fairly rough pressure treated wood trim. It's been warm, dry, and sunny. I used Kilz water base exterior primer and it would dry on the rough t-111 in under an hour. Some nooks and crannies on the trim would collect a little more paint and it might take two hours. I didn't have any problems with recoat with primer after a couple of hours. Because I was working in some very detailed places, I ran out of time to put on the two coats of final color until a couple of days later, which was probably just as well to allow for the primer to get good and cured.

          Hope this helps.
          - Chris.

          Comment

          • jseklund
            Established Member
            • Aug 2006
            • 428

            #6
            I have been renovating a house- and my gf has been doing a lot of painting. We've been priming with Kilz2 and it usually dries in about an hour. Worst case, I'd say two hours for a coat to dry should do it with the Kilz.
            F#$@ no good piece of S#$% piece of #$@#% #@$#% #$@#$ wood! Dang. - Me woodworking

            Comment

            • p8ntblr
              Senior Member
              • Jan 2007
              • 921
              • So Cal
              • Craftsman 22114

              #7
              Thanks guys. I'll be using Kilz as well and will be painting indoors. Sounds like it should dry in time.
              -Paul

              Comment

              • scmhogg
                Veteran Member
                • Jan 2003
                • 1839
                • Simi Valley, CA, USA.
                • BT3000

                #8
                Paul,

                Where do you get Kilz paint balls??

                Steve
                I would never die for my beliefs because I might be wrong. Bertrand Russell

                Comment

                • tuttlejr
                  Established Member
                  • Aug 2003
                  • 440
                  • LAKEWAY, TX, USA.

                  #9
                  I have had great luck with Bullseye 123 primer which is water based. Recoatable ib about an hour. Can be tinted. Sticks to just about anything: Galvanized, Glass, any slick clean surface. A better choice than Kilz for most purposes. Made by the same company. Clean your hands immediately as it is tenacious with its grip. Or wear gloves.
                  Bob Tuttle

                  Comment

                  Working...