Serving Tray Plans

[Mrs. Wallnut]

Does anyone know where I could find a picture or a plan for a simple serving tray. That is going to be my next project besides a BS box. I have an idea of what I want but I need to have something to show Mark what I have in mind so that he can help me with it, because I haven't used a router in a LONG LONG time and I am going to have him help me so that I have the help and support of making this tray.

I would like to do box joints on the corners and have the sides straight and not at an angle, because for this beginner I think it might be easier.

Thanks

[bfrikken]

There are some plans from WOOD magazine. Here is the link to their site:
http://store.woodstore.net/kiac.html

There's a couple different ones on there. One from December 2002 issue and the other from Featured in the September 2005 issue.

[gmack5]

Here ya go!

There are several different designs in the link that's shown below.
Hope one of them will do what you want done.

http://www.woodworkersworkshop.com/r...=482&offset=15

[scmhogg]

BBM,

I have always wanted to make a Butler's Tray/Table. This is a little more than you asked for but just look!!

http://www.woodworkersjournal.com/pl...tails/5/80/186

Rockler has the hardware.

Steve

[bigsteel15]

Here is a recent one from a mag I subscribe to.
Unfortunately they don't have the plans available that I could find, only the entire magazine, but it's pretty cheap.
http://www.canadianwoodworking.com/pastindex.php

[uglystick]

Butler's tray table

BBM,

I have always wanted to make a Butler's Tray/Table. This is a little more than you asked for but just look!!

http://www.woodworkersjournal.com/pl...tails/5/80/186

Rockler has the hardware.

Steve

You can download that Butler's tray plan for free from: http://www.cedarcreekwoodshop.com/butlertray.pdf

[Mrs. Wallnut]

Thanks everyone for the sites and links they were very helpful. I will let you know how the progress goes on the tray.