Saw an ad in today's paper. Went for a jointer (had it in the paper for $75) and got the following too (TOTAL PRICE $105):
Delta 37-190 Jointer (with rust and after rust)
Delta 40-540 16" Variable Speed Scroll Saw and Dewalt DW318 Jigsaw
Bunch of clamps and other things (see list below)
2 Quick Grip 6" Quick Clamps
1 12" Jorgenson E-Z Hold II clamp
2 36" 1/2 pipe clamps
2 mini 6" quick grip clamps
3 C-clamps
1 corner clamp
2 spring clamps
1 hachet
2 buck knives
1 old rusted planer (about 17" long)
1 cat's claw
4-way tire iron
2 car jacks
1 drill stand for portable drill
1 adjustable Stanley speed square
1 framing square
Spent a couple of hours getting the rust off and ran a piece of scrap across the blades. Infeed and outfeed are flat and blades are in decent shape (maybe need a dressing). Overall I think I did good. D/L the manuals for both Now to build a mobile base and hook up the DC to it (going to have to rig something there) and all I will now need for the small shop is a bandsaw.
Delta 37-190 Jointer (with rust and after rust)
Delta 40-540 16" Variable Speed Scroll Saw and Dewalt DW318 Jigsaw
Bunch of clamps and other things (see list below)
2 Quick Grip 6" Quick Clamps
1 12" Jorgenson E-Z Hold II clamp
2 36" 1/2 pipe clamps
2 mini 6" quick grip clamps
3 C-clamps
1 corner clamp
2 spring clamps
1 hachet
2 buck knives
1 old rusted planer (about 17" long)
1 cat's claw
4-way tire iron
2 car jacks
1 drill stand for portable drill
1 adjustable Stanley speed square
1 framing square
Spent a couple of hours getting the rust off and ran a piece of scrap across the blades. Infeed and outfeed are flat and blades are in decent shape (maybe need a dressing). Overall I think I did good. D/L the manuals for both Now to build a mobile base and hook up the DC to it (going to have to rig something there) and all I will now need for the small shop is a bandsaw.
Comment