Christmas Present

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • drillman88
    Senior Member
    • Dec 2007
    • 572
    • Southeast
    • Delta Platinum Edition Contractor Saw

    #1

    Christmas Present

    This was my Christmas Gift to myself.I have been looking to upgrade my tablesaw for a while now. I finally found close to what I was looking for at a price I couldnt pass up.It is a Delta platinum edition contractor saw with a unifence and 2 fences one 33" long is setup for the left side of blade the other is 43" and setup for the right of blade.The cross cut sled is simple but worked well on some scrap ply I tried it on.It also came with 2 taper Jigs that arent shown.The table had one rust spot were someone set a cup on it.
    The cart is a old one that I am modifying to make work with this saw. Im going to try it out then make a new one if it doesn't suit me.I probably start working on making the extension into a router table soon.
    I got it all for $225 from a contractor going out business.I think it was worth the 260 mile round trip.
    Attached Files
    I think therefore I .....awwww where is that remote.
  • Black wallnut
    cycling to health
    • Jan 2003
    • 5513
    • Ellensburg, Wa, USA.
    • BT3k 1999

    #2
    Let me be the first to say "YOU SUCK!" Nice score, thinking you got a deal. Enjoy many happy cuts to come.
    Donate to my Tour de Cure


    marK in WA and Ryobi Fanatic Association State President ©

    Head servant of the forum

    ©

    Comment

    • Ed62
      The Full Monte
      • Oct 2006
      • 6021
      • NW Indiana
      • BT3K

      #3
      Nice find! We don't find those kind of deals north of the Mason Dixon line.

      Ed
      Do you know about kickback? Ray has a good writeup here... https://www.sawdustzone.org/articles...mare-explained

      For a kickback demonstration video http://www.metacafe.com/watch/910584...demonstration/

      Comment

      • drillman88
        Senior Member
        • Dec 2007
        • 572
        • Southeast
        • Delta Platinum Edition Contractor Saw

        #4
        It came with a dado insert too.I tried to talk him into throwing in a Freud stack dado but he wouldn't come off it.I figured it doesn't hurt to ask.
        I had to clean out the trunnions and gears and lub them up.The saw hadnt been used in a whlie and they were tight I still need to finish the set up.I forgot to bring my indicator home from work so Ill get to it this weekend.
        No problems beside that.

        Ed they are rare here too I waited for 6 months and looked at several saws before I got this one.
        Last edited by drillman88; 12-30-2008, 09:23 PM.
        I think therefore I .....awwww where is that remote.

        Comment

        • Jim1
          Forum Newbie
          • Apr 2007
          • 36
          • Hill Country in Texas
          • General 650

          #5
          That's a good saw. I've used one, only with a bies. The saw will do almost anything you ask of it. I think the platinums were all still made in the US. By the way, that is one heck of a good price!!! Congrats!

          Jim

          Comment

          • shoottx
            Veteran Member
            • May 2008
            • 1240
            • Plano, Texas
            • BT3000

            #6
            Is it appropriate to say

            Merry Christmas

            and You Suck in the same post?
            Often in error - Never in doubt

            Mike

            Comment

            • drillman88
              Senior Member
              • Dec 2007
              • 572
              • Southeast
              • Delta Platinum Edition Contractor Saw

              #7
              Thanks guys,
              The saw is indeed american made.I really like the unifence so far I cant even start to tell you how much better it is than my old saw.
              I got thrown for a loop when I searched for the owners manual on line and ended up at the dewalt web site.I hope they dont forget about the owner support on these products eventually.
              I think therefore I .....awwww where is that remote.

              Comment

              • SARGE..g-47

                #8
                The Uni-fence alone is worth what you paid.. ya done good!

                Regards..

                Comment

                Working...