Cleaning up dry wall joints

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • thrytis
    Senior Member
    • May 2004
    • 552
    • Concord, NC, USA.
    • Delta Unisaw

    #1

    Cleaning up dry wall joints

    I'm in the process of stripping the popcorn texture from my ceiling. As part of this, i'm cleaning up the joints before i paint. The joints where the angled dry wall meets the top of the ceiling aren't the straightest, so i'm trying to decide the best way to clean them up a little. The easiest thing would just be smooth it out with more joint compound, but i was wondering if it would be better to just pull off the tape and retape. The dry wall isn't completely flat and the joint not perfectly straight, but i saw Strait-Flex which designed for situations like this. I know whatever i do it isn't going to be perfect, so is it worth retaping? Does anyone have any experience doing this?






    The tape seems to be in tact here, it is just the joint compound cracking.
    Eric
  • atgcpaul
    Veteran Member
    • Aug 2003
    • 4055
    • Maryland
    • Grizzly 1023SLX

    #2
    Wow! Looks like you did a really good job scraping that ceiling.
    This is on my todo list.

    I think you'll find that once you paint the ceiling a uniform color,
    the uneveness of that joint will disappear. It's probably just so
    obvious now because of the contrast of the white tape against the
    grey drywall.

    Paul

    Comment

    • rg32
      Established Member
      • Jul 2004
      • 340
      • Barre, Vermont, USA.

      #3
      Will you be painting the walls or wallpapering
      It could be difficult to get a totally even joint
      Some solutions that have worked well for me:
      Building a flat crown molding that has a bevel that matches to the knee walls.
      You might consider working the joint the best you can and just using a wallpaper type border butting up to the ceiling(hides lots of sin).



      Comment

      • JR
        The Full Monte
        • Feb 2004
        • 5636
        • Eugene, OR
        • BT3000

        #4
        I'd probably try to mud it the way it is. Starting over with new tape takes two or three steps to get it where it is now (minus the unevenness, of course).

        I just did a small room (10' x 10'), plus added a drywall cap over an exposed beam. The taping and mudding of the cap more than doubled the workload.

        JR
        JR

        Comment

        • JimD
          Veteran Member
          • Feb 2003
          • 4187
          • Lexington, SC.

          #5
          I also would not try and pull the existing tape. If it is intact, I think it is best left alone. You may be very unpleasantly surprised at how bad the fit-up of the two pieces of drywall that is under the tape is. The guys that hang drywall are typically young kids who work quick but very crudely. When the taping isn't straight, it was either somebody learning the trade or a skilled person covering up things as best they could. I would assume the latter and just try and improve it a little. If you pull the tape, I would would be prepared to also reinstall the drywall because that is likely to be contributing significantly to the unevenness that is visible.

          Jim

          Comment

          • dlminehart
            Veteran Member
            • Jul 2003
            • 1829
            • San Jose, CA, USA.

            #6
            SAFETY NOTE: most popcorn ceilings done in houses before the '70s contained asbestos. So long as the asbestos is undisturbed, it poses no risk. When released into the air, as during popcorn removal from ceilings, there is no safe threshold for exposure. It is most dangerous to children, as the longer the tiny fibers are embedded in the lungs, the more likely they'll cause damage, including lung cancer. It costs about $30 to have a sample tested for asbestos. Even if asbestos is found, in most situations (e.g., no paid help, small total quantity) you can remove it yourself. BUT, if asbestos is present, you'll really want to take elaborate safety precautions. See http://www.naturalhandyman.com/iip/i...opcornoff.shtm for some details. This is one of those areas where you want to resist the temptation to macho or under-budget your way through a project, since contamination of your living space will persist and imperil many others besides yourself. The most dangerous fibers are the ones small enough to be invisible, easily spread through the air, and most likely to be deeply embedded in lungs.
            - David

            “Be yourself; everyone else is already taken.” -- Oscar Wilde

            Comment

            • Tom Miller
              Veteran Member
              • Mar 2003
              • 2507
              • Twin Cities, MN
              • BT3000 - Cuttin' it old school

              #7
              I agree with others that you could really be opening a can of worms by taking off the old tape.

              But, maybe you could apply that strait-flex without taking off the old tape first. If you apply some mud to fill in the low spots, then seat the strait-flex, you might get good results easier than just trying to straighten out the joint with mud alone.

              Regards,
              Tom

              Comment

              • Marc
                Forum Newbie
                • Nov 2005
                • 16
                • Hamburg, NY.

                #8
                Check out a product called ultraflex by a company called No-Coat. In my years of hanging and taping drywall there is not a better product for concealing flaws in angled ceilings. When your done installing and mudding it in, all you will see is a razor straight line. The best part is you can install it right over your existing tape with no worries. Unfortunately it's not available at BORG or Lowes but you should be able to find it locally at most drywall suppliers or online. One roll has 50' of ultraflex and it can also be used for flawless inside corners.
                \"Education is what you have left over after you have forgotten everything you have learned.\"

                Comment

                • maxparot
                  Veteran Member
                  • Jan 2004
                  • 1421
                  • Mesa, Arizona, USA.
                  • BT3100 w/ wide table kit

                  #9
                  I would put new tape over the cracked spots and skim and sand the entire area.
                  Opinions are like gas;
                  I don't mind hearing it, but keep it to yourself if it stinks.

                  Comment

                  • woodsmoke
                    Forum Newbie
                    • Dec 2005
                    • 28
                    • Pablo, MT, USA.

                    #10
                    With quite a bit of drywall behind me (just one of the things I learned while working for contractors til I went on my own) I would use the no coat. Sherwin-Williams use were able to get it for us.
                    If you are going with smooth surfaces it will be a must! The lighter the texture the more impeprefections that will show. Thats why they invented accoustical texture, just fire tape it and texture it. Also known as "blow and go" by one of my EX employers!
                    If it is impossible just give me a couple more days.

                    Comment

                    • thrytis
                      Senior Member
                      • May 2004
                      • 552
                      • Concord, NC, USA.
                      • Delta Unisaw

                      #11
                      Thanks guys! I'll take the unanimous advice and not touch the existing tape. I might give the No-Coat Ultraflex tape over the existing a try and see how that works.
                      Eric

                      Comment

                      • thrytis
                        Senior Member
                        • May 2004
                        • 552
                        • Concord, NC, USA.
                        • Delta Unisaw

                        #12
                        Marc, thanks for the No-Coat Ultraflex tape tip. I ordered some Ultraflex 325 from someplace i found online and applied it to one of the joints over the existing tape. It was pretty easy except for having to suspend the yet to be attached end 12' in the air by myself. It made a nice sharp, straight corner. It isn't perfect (i think i would have to replace the dry wall to get that), but it looks much better than it did before, even hidden under the popcorn.

                        It is kind of tough to photograph because of the low contrast (a good thing!), but here it is now.





                        One quarter of the ceiling done, three to go!
                        Eric

                        Comment

                        • Marc
                          Forum Newbie
                          • Nov 2005
                          • 16
                          • Hamburg, NY.

                          #13
                          I'm glad it worked out well for you. It looks much nicer then your before picture. Just a tip for the next time you use ultraflex is staple both ends of tape up while you work it in.
                          \"Education is what you have left over after you have forgotten everything you have learned.\"

                          Comment

                          Working...