Norm has modified the original stand of his BT3000 into a very nice mobile base with ample storage. About this project, Norm comments "Perhaps the most original (or gimmicky?) thing about the cabinet is the blade
holders. Each of the vertical pine faces is grooved to hold a 6 mm piece of finish
plywood. In turn, the plywood pieces slide in dadoes cut in the carcass of the
cabinet". Be sure to check this one out.
holders. Each of the vertical pine faces is grooved to hold a 6 mm piece of finish
plywood. In turn, the plywood pieces slide in dadoes cut in the carcass of the
cabinet". Be sure to check this one out.