I upgraded my table saw to a Ridgid 3650 and planned to keep the BT3 for dado's etc. It is taking up too much room in my shop and it makes more sense to use the RAS or router for the dado's.
1 BT3100 for sale - included items are as follows:
Main saw (leg stands, saw, router table, miter slot, rails, smt, rip fence, accessory kit, etc)
Extras:
A second rail set (this includes the custom aluminum brackets, t-nuts, bolts, etc)
A second rip fence which I had dedicated for use with the router table
A second router table I used to help fill in some of the extra real estate with 2 rail sets
1 24" undrilled fixture block http://t-nuts.com/index.php?cPath=77_63
1 Shark Splitter and Clamp (I do not have the actual guard)
12 small t-nuts
12 medium t-nuts
11 large t-nuts
11 xl t-nets
Plus assorted t-bolt studs for the above t-nuts
Missing/broke Items:
The stock blade guard is not operable. All of the parts are there except the one pin.
I don't have a blade on the saw since it was used as a dado only for a few months.
Not included:
My custom filler tables for the 2nd rail set,etc.
Terms:
Price - Best Offer (Let me know if you want pictures)
I will NOT ship the saw.
I will NOT part out the saw (unless nobody wants to buy it as a whole)
I will sell the main saw as one item and all of the "extras" seperately if needed.
At this point in time it is a local sale only (Eastern PA near Allentown).
The saw is being sold as is, since the guard is not operable and should be replaced/fixed by the buyer.
1 BT3100 for sale - included items are as follows:
Main saw (leg stands, saw, router table, miter slot, rails, smt, rip fence, accessory kit, etc)
Extras:
A second rail set (this includes the custom aluminum brackets, t-nuts, bolts, etc)
A second rip fence which I had dedicated for use with the router table
A second router table I used to help fill in some of the extra real estate with 2 rail sets
1 24" undrilled fixture block http://t-nuts.com/index.php?cPath=77_63
1 Shark Splitter and Clamp (I do not have the actual guard)
12 small t-nuts
12 medium t-nuts
11 large t-nuts
11 xl t-nets
Plus assorted t-bolt studs for the above t-nuts
Missing/broke Items:
The stock blade guard is not operable. All of the parts are there except the one pin.
I don't have a blade on the saw since it was used as a dado only for a few months.
Not included:
My custom filler tables for the 2nd rail set,etc.
Terms:
Price - Best Offer (Let me know if you want pictures)
I will NOT ship the saw.
I will NOT part out the saw (unless nobody wants to buy it as a whole)
I will sell the main saw as one item and all of the "extras" seperately if needed.
At this point in time it is a local sale only (Eastern PA near Allentown).
The saw is being sold as is, since the guard is not operable and should be replaced/fixed by the buyer.