Announcement

Collapse
No announcement yet.

Blade lift issue BT3000. Difficult to explain, and motion too small to photograph.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blade lift issue BT3000. Difficult to explain, and motion too small to photograph.

    Changed out shims. Issue seems to be that the whole guide holder seems to be tilting sideways, and jamming on the up motion. Too much slack sideways. [when sitting face on with the side cover off.] A slight lift on the blade guard assembly screws and it raises fine. No problem lowering. Almost seems that adjustment set screws are needed sideways too. Almost ready to trash the darn thing. Pity, cos I have the extension rails and its worked well til last year. Now its driving me nuts.
    Last edited by Syncman; 11-01-2017, 05:40 PM.
Working...
X