Announcement

Collapse
No announcement yet.

Hitachi Tools to be renamed under Metabo?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gdubyah
    commented on 's reply
    Metabo and hitachi have been top quality for years .....being in the cabinet trade as well as finish carpentry for thirty plus years....hitachi is the best compound saw on the market in my opinion

  • capncarl
    replied
    A few years ago our welding supply co started selling Metabo side grinders. I had to have one so I bought a 5” angle grinder. It cost significantly more than the competitors. I’ve used and abused it hard, it’s the best grinder I’ve ever used. Soft start, variable speed and some kind of control that maintains its speed regardless how hard you work it! I’ve never notice it getting hot, while I have melted down several 5” Dewalt angle grinders. I would put this tool at the top of the heap, definitely not cheap tools.

    Leave a comment:


  • leehljp
    replied
    Originally posted by woodturner View Post

    I recall an Inca that I think was that style, probably mid-1980's. I vaguely remember a couple of other import brands offered something similar, and I think Woodmaster had something like that. I don't recall the Hitachi or Makita being available in the US.
    Now that you mention it, it seems like I had seen one in advertisements in woodworking magazines some time ago.

    Leave a comment:


  • woodturner
    replied
    Originally posted by leehljp View Post
    You are right, never saw that type in the USA.
    I recall an Inca that I think was that style, probably mid-1980's. I vaguely remember a couple of other import brands offered something similar, and I think Woodmaster had something like that. I don't recall the Hitachi or Makita being available in the US.

    Leave a comment:


  • leehljp
    replied
    Originally posted by Gbotha View Post
    Many years ago in South Africa Metabo was the top of the line. Slogan "Men use Metabo". I had an under/over jointer/thickness planer combo, that was the best. Jointer on top of blades, 10", beds flip over to allow thicknessing under the blades. 2 tools in one. Never seen that in USA as a benchtop tool.
    Strange that you mention the over/under Metabo thickness planer/jointer. When I was in Japan in Osaka, I almost purchased a Hitachi Over/Under Jointer-Thickness Planer. You are right, never saw that type in the USA. Quality all the way through. I lived in the Osaka area from '92-'04. Osaka had a "tool district" which was something like a very large "Tool Mall" of stores. Lots of tool there that were not available in the USA. That makes me wonder if Hitachi and Metabo had a relationship way back in the mid to late '90s.

    I have an in Japan purchased Hitachi circular saw (180-185mm) 7" - 7 1/4" - that I brought back along with several saw blades that fit it. That saw cost the equivalent of about $350 back in 2005-2006. It has a hand hold feel that is solid, the motor is smooth, cutting is smooth, solid non-twist/distortion foot plate. I don't use it except when doing finishing cuts on a board of something I am building. I am under-using it - as it is much tougher than my USA Dewalt and Makita circular saws. But I just don't want to wear it out.


    This is getting off of the subject of Hitachi-Metabo - But, back in the early '90s (90-91) I went on a church build with some volunteers from the US. There was a Ryobi BT3000 there that was being used, and also a Makita table saw. The Makita Table Saw was almost identical to the BT3000. I used to have a Japanese brochure on that Makita saw but lost it long ago. The Makita, while looking almost identical to the Ryobi was somewhat heavier even though it was made of aluminum also. I never saw one in a store but did see several Ryobi BT3000s in the stores, but they were always the whole system of wide tables and dust collection that cost nearly $2000.

    Yes, there are tools available overseas that we never see in the USA.
    Last edited by leehljp; 12-29-2019, 11:07 AM.

    Leave a comment:


  • Gbotha
    replied
    Many years ago in South Africa Metabo was the top of the line. Slogan "Men use Metabo". I had an under/over jointer/thickness planer combo, that was the best. Jointer on top of blades, 10", beds flip over to allow thicknessing under the blades. 2 tools in one. Never seen that in USA as a benchtop tool.

    Leave a comment:


  • woodturner
    replied
    Originally posted by leehljp View Post
    And it looks like Hitach is letting their tools be renamed as Metabo.

    As an aside, I enjoyed the Makita brands and always thought of them as the highest quality of Japanese tools, but in discussions with the Japanese master carpenters/skilled woodworkers that I knew, they all said Hitachi was the top brand to Japanese workers.
    In the US both Hitachi and Makita are known as top brands, though they don't seem to be as popular or widely used as they once were. In the 1980's Hitachi and Makita offered machine tools that were unmatched at the price by other brands. Portable tools were considered a step above Porter Cable and Bosch.

    Metabo is a lesser known but high quality brand known for specific niche tools.

    Not sure what brought the merger but should result in continued high quality tools.

    Leave a comment:


  • LCHIEN
    replied
    I have to say I have two well made tools from Hitachi (standing 15" drill press and 12" CMS) but I am totally unfamiliar with Metabo.

    I would have said Hitachi is the better known name.

    So I guess that's an interesting new development.

    Leave a comment:


  • Carlos
    replied
    I've noticed that changing a lot also in the last few months. I've always considered Hitachi and Makita to be low end brands, so I guess they are trying to build a new image?

    Leave a comment:


  • leehljp
    started a topic Hitachi Tools to be renamed under Metabo?

    Hitachi Tools to be renamed under Metabo?

    I just noticed on Amazon that there was a heading by one Hitachi item that showed Hitach->Metabo. Then I saw it again. I did a search and saw that at Lowes, Hitachi was becoming Metabo. Further searches found that Hitachi bought out Metabo 100% back around 2016. (Actually Hitachi bought the holding company which owned 80% and bought the remaining 20% from the original owners.

    And it looks like Hitach is letting their tools be renamed as Metabo.

    As an aside, I enjoyed the Makita brands and always thought of them as the highest quality of Japanese tools, but in discussions with the Japanese master carpenters/skilled woodworkers that I knew, they all said Hitachi was the top brand to Japanese workers.
Working...
X