ok, the only thing that i have that runs on 220 is my grizzly bandsaw.
i currently have 220 in my larger garage, however, the one car garage does not have 220, which is my ww shop.
so i have two options to do the wiring. i do not use my bandsaw that often. wiring layout out wise, the two garages are on opposite sides of the house (floor plan is like the letter G).
so what option should i go with and what size wire. if option 2 makes more sense then what wire size do i need?
thanks in advance!
i currently have 220 in my larger garage, however, the one car garage does not have 220, which is my ww shop.
so i have two options to do the wiring. i do not use my bandsaw that often. wiring layout out wise, the two garages are on opposite sides of the house (floor plan is like the letter G).
- run a 220 through the attic into the smaller garage. so i will have to run approx 130 ft of wiring for this to happen.
- the 2nd option is to run an extension cord from one garage to the other garage when i use the band saw and that would be like 25ft. however, i will have to wire 220 from one side to the other side of the two car garage.
so what option should i go with and what size wire. if option 2 makes more sense then what wire size do i need?
thanks in advance!
Comment