Ryobi bt3000 rip fence

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Mce2191
    Forum Newbie
    • Feb 2021
    • 5

    Ryobi bt3000 rip fence

    Hi,

    Looking to buy a rip fence for my bt3000. Either a complete fence or the plastic insert/clamp that goes into the fence and attaches to the back rail.

    Thank you!
  • LCHIEN
    Internet Fact Checker
    • Dec 2002
    • 20914
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    If the plastic roller holder is broken at the rear of the fence, there is this metal aftermarket option that several of us here have had great luck with and willl last forever.
    on EBay you can get either the block alone or for a few bucks more you can get the pins, roller, and clamp that mount in it.

    Very highly recommended - discussed and linked in this thread below:

    Has anyone else used this for the rip fence end? Mine was broken when I got it so I gave this a try and found that it works awesomely. See picture below.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • Mce2191
      Forum Newbie
      • Feb 2021
      • 5

      #3
      Originally posted by LCHIEN
      If the plastic roller holder is broken at the rear of the fence, there is this metal aftermarket option that several of us here have had great luck with and willl last forever.
      on EBay you can get either the block alone or for a few bucks more you can get the pins, roller, and clamp that mount in it.

      Very highly recommended - discussed and linked in this thread below:

      https://www.sawdustzone.org/forum/di...holder-clamper
      Thanks. Unfortunately the metal version and the block itself are both sold out currently.

      Comment

      • LCHIEN
        Internet Fact Checker
        • Dec 2002
        • 20914
        • Katy, TX, USA.
        • BT3000 vintage 1999

        #4
        If your roller-holder block is broken, then I have a spare plastic original Ryobi that is new. I'm confident I won't need it since I have a metal one.
        I probably paid about 10 bucks for it and US shipping is probably 7-8 dollars, if you are interested.

        Loring in Katy, TX USA
        If your only tool is a hammer, you tend to treat all problems as if they were nails.
        BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

        Comment

        • Mce2191
          Forum Newbie
          • Feb 2021
          • 5

          #5
          Originally posted by LCHIEN
          If your roller-holder block is broken, then I have a spare plastic original Ryobi that is new. I'm confident I won't need it since I have a metal one.
          I probably paid about 10 bucks for it and US shipping is probably 7-8 dollars, if you are interested.
          Yeah that would be great.

          Comment

          Working...