<first off, the changed settings on the forum are a bit ... new ... to me. Am still finding my way to posting pictures and all..>
I have two full bathrooms. I want to upgrade both, but first the smaller one is being planned now.
This is a 9' x 5', with a single vanity/sink, toilet and bath-tub. I want to pull everything out, replace the tub with a shower enclosure, put new tiles on the floor and on the walls all around (just halfway high - the walls are 14 feet tall!).
For this, I have engaged a small time handyman who did outstanding jobs with three of my acquaintances (a close friend, and then couple of his work colleagues). He has the experience, the skill and the work-ethic, but he wants me to buy all the fixtures, which suits us too.
This brings me to choosing the vanity/sink (among other stuff). The current vanity is 33" wide, which is not a regular size. I think a 30" should fit there. I want one that has a few drawers and some other storage options. But I want to be sure the plumbing does not come in the way of that. The plumbing looks like this (the 2nd picture). The distance of the output hole from the left wall is around 27.5 inches.
Please ignore the patch-up job I did when I fixed a leaking pipe recently. I think it can be neater, without the flexi-pipe.
That said, the current vanity does not have any drawers; will the pipes here pose a problem?
I was thinking of picking something like this 30" variety of this vanity :
(Ignore this link below please; I'm unable to delete it)
I have two full bathrooms. I want to upgrade both, but first the smaller one is being planned now.
This is a 9' x 5', with a single vanity/sink, toilet and bath-tub. I want to pull everything out, replace the tub with a shower enclosure, put new tiles on the floor and on the walls all around (just halfway high - the walls are 14 feet tall!).
For this, I have engaged a small time handyman who did outstanding jobs with three of my acquaintances (a close friend, and then couple of his work colleagues). He has the experience, the skill and the work-ethic, but he wants me to buy all the fixtures, which suits us too.
This brings me to choosing the vanity/sink (among other stuff). The current vanity is 33" wide, which is not a regular size. I think a 30" should fit there. I want one that has a few drawers and some other storage options. But I want to be sure the plumbing does not come in the way of that. The plumbing looks like this (the 2nd picture). The distance of the output hole from the left wall is around 27.5 inches.
Please ignore the patch-up job I did when I fixed a leaking pipe recently. I think it can be neater, without the flexi-pipe.
That said, the current vanity does not have any drawers; will the pipes here pose a problem?
I was thinking of picking something like this 30" variety of this vanity :
(Ignore this link below please; I'm unable to delete it)
Comment