Jig saw attachment

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • colomoose
    Handtools only
    • Sep 2014
    • 2

    Jig saw attachment

    Looking for jigsaw attachment kit
  • LCHIEN
    Super Moderator
    • Dec 2002
    • 21459
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    I have a complete router mounting kit.
    There were two kits, one kit with two plates, one for router and one for jigwaw.
    The other kit only had the router plate.

    Mine is the one with two plates.
    I'd like to keep the router mounting plate and related items.

    Would you be interested in the kit less the router plate and filler rings but with the jigsaw plate and all the fence items?
    Its actually quite possible to mount a router to the jig saw plate if you wanted to use a router,Click image for larger version  Name:	image.png Views:	0 Size:	1.56 MB ID:	860283
    In the above pic I would keep the plate on the right and the red rings.

    Click image for larger version  Name:	BT3000 Router accessory kit.webp Views:	0 Size:	115.9 KB ID:	860284
    You get all the other hardware except the red rings and the one plate.

    You still have the option to mount a router later, it requires 3 drilling holes to mount most routers; the four hole in the plate I keep are only for the Ryobi routers of the day.

    Do you have any other suggestion? If you are only using the jig saw then the fence attachments are not much use to you.
    Last edited by LCHIEN; 01-25-2025, 02:13 AM.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • colomoose
      Handtools only
      • Sep 2014
      • 2

      #3
      Yes you keep plate and red rings. How much?

      Comment

      • LCHIEN
        Super Moderator
        • Dec 2002
        • 21459
        • Katy, TX, USA.
        • BT3000 vintage 1999

        #4
        Lets take this to this forum's private mail... look for a message there.
        Loring in Katy, TX USA
        If your only tool is a hammer, you tend to treat all problems as if they were nails.
        BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

        Comment

        • Jim Frye
          Veteran Member
          • Dec 2002
          • 1073
          • Maumee, OH, USA.
          • Ryobi BT3000 & BT3100

          #5
          Here's mine. Note the vac port. And an article link for the build.
          https://www.sawdustzone.org/articles...-jig-saw-mount
          Attached Files
          Last edited by Jim Frye; 02-01-2025, 11:12 AM.
          Jim Frye
          The Nut in the Cellar.
          ”Sawdust Is Man Glitter”

          Comment

          Working...