So I’m new to this forum (first post)….perhaps this information is somewhere else, but I couldn’t find it…so here we go.
I bought this BT3000 a couple of years ago but never really tried to set it up…the few times I used it the fence wasn’t always parallel with the blade…I thought it might need to be adjusted but was just too lazy to do it so I never used it, until yesterday. I got around to looking at the fence and it turns out there is a small nylon tracking wheel (#3 in the exploded diagram) and a small steel pin (#8 in the diagram) that are missing.
Could this be why my fence will not align properly? Is there a supplier for these parts?
I’ve tried a couple of parts sites on the web but they all say discontinued.
Any help would be appreciated
Pat
I bought this BT3000 a couple of years ago but never really tried to set it up…the few times I used it the fence wasn’t always parallel with the blade…I thought it might need to be adjusted but was just too lazy to do it so I never used it, until yesterday. I got around to looking at the fence and it turns out there is a small nylon tracking wheel (#3 in the exploded diagram) and a small steel pin (#8 in the diagram) that are missing.
Could this be why my fence will not align properly? Is there a supplier for these parts?
I’ve tried a couple of parts sites on the web but they all say discontinued.
Any help would be appreciated
Pat
Comment