Aluminum RollerHolder&Clamper

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Dedpedal
    Established Member
    • Feb 2020
    • 255
    • Palm Coast Florida
    • One BT3000 in use and one for parts. Plus a BT3100

    Aluminum RollerHolder&Clamper

    Has anyone else used this for the rip fence end? Mine was broken when I got it so I gave this a try and found that it works awesomely. See picture below.
    Attached Files
  • LCHIEN
    Internet Fact Checker
    • Dec 2002
    • 20914
    • Katy, TX, USA.
    • BT3000 vintage 1999

    #2
    Machined aluminum roller holder (part of rear assembly on BT3000 rip fence) I bought one from eBay (Feb 2019) and it works great and I think will definitely outlast the rest of the saw.

    I only bought the bracket, the clamper and roller and pins I used from my old one. Hopefully the plastic roller wheel will not break!

    https://www.amazon.com/Generic-Rolle...034897&sr=8-33

    eBay is showing some right now https://www.ebay.com/sch/i.html?_fro...vice=c&mkcid=2

    one bare, and the other with clamper and roller 48 to 68 bucks or so,

    A good solution to fixing your rip fence.
    Last edited by LCHIEN; 04-20-2021, 12:28 AM.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ - https://www.sawdustzone.org/forum/di...sked-questions

    Comment

    • Dedpedal
      Established Member
      • Feb 2020
      • 255
      • Palm Coast Florida
      • One BT3000 in use and one for parts. Plus a BT3100

      #3
      I was looking at it today on amazon. I’m thinking about buying another. Hopefully anyone else that is interested can see the number on my pic.

      Comment

      • leehljp
        Just me
        • Dec 2002
        • 8429
        • Tunica, MS
        • BT3000/3100

        #4
        I bought one also, - I think close to the same time Loring did. It works well!
        Hank Lee

        Experience is what you get when you don't get what you wanted!

        Comment

        • GrumpyDad
          Established Member
          • Jul 2020
          • 163
          • Midwest
          • Ryobi BT3100, BT3000, Sawstop PCS

          #5
          Same here. Love it.
          Harumpf!
          GrumpyDad

          Comment

          • leehljp
            Just me
            • Dec 2002
            • 8429
            • Tunica, MS
            • BT3000/3100

            #6
            I recently purchased an aluminum Miter Fence holder also:
            https://www.ebay.com/itm/Miter-Fence...4AAOSwj0Nercid

            Well worth it, IMHO.
            Hank Lee

            Experience is what you get when you don't get what you wanted!

            Comment

            • Dedpedal
              Established Member
              • Feb 2020
              • 255
              • Palm Coast Florida
              • One BT3000 in use and one for parts. Plus a BT3100

              #7
              Originally posted by leehljp
              I recently purchased an aluminum Miter Fence holder also:
              https://www.ebay.com/itm/Miter-Fence...4AAOSwj0Nercid

              Well worth it, IMHO.
              I looked at that one too but it doesn’t have all the hardware to replace the one I didn’t get when I bought my saw.

              Comment

              • Atonic
                Handtools only
                • Apr 2021
                • 1

                #8
                I ordered one from ebay last week. ~$65 + tax+shipping= $75. Cme today and I just installed in. Works fine.

                I did have to drill out the holes in the rip fence. Screws were too big. 1/4" bit and done in 3 minutes.

                Comment

                • SAABologist
                  Forum Newbie
                  • Jun 2021
                  • 18
                  • Texas
                  • Ryobi BT3000

                  #9
                  I bought one, complete with the clamper since my clamper was gone when I bought the saw. I paid the same for this part as for the entire saw, and feel like it was completely worth is. My rip fence is solid! I also did a repair on the front end of the rip fence to replace the Plate piece. I made a separate thread on that repair.

                  Comment

                  Working...