BT3000/BT3100 Made in USA.

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

  • BT3000/BT3100 Made in USA.

    The original BT3000 were designed and made in the USA - Ryobi was located, I think, in North Carolina. This one a rare 240 Volt model made in 14th week, 1993 - first year of production. Rod Kirby's, I suspect since this was posted on ( back then).

    Designed and manufactured in the USA it had all SAE fasteners - fractional inch. Even though the Nameplate said 254 mm saw (10 inches).

    Click image for larger version  Name:	240V BT3000 serial number tag.jpg Views:	0 Size:	73.7 KB ID:	846253

    Later production was made in Taiwan. this one 20th week 2000.
    Click image for larger version  Name:	BT3000 serial number 2000 year model.jpg Views:	0 Size:	57.6 KB ID:	846254
    Attached Files
    Last edited by LCHIEN; 11-21-2021, 11:24 PM.
    Loring in Katy, TX USA
    If your only tool is a hammer, you tend to treat all problems as if they were nails.
    BT3 FAQ -

  • #2
    Ryobi was headquartered in Anderson, SC and still is even though corporate ownership has changed over the years. My BT3K was and early build as was the BT3100 they sent me for evaluation.
    Click image for larger version  Name:	20211122_184026.jpg Views:	0 Size:	108.7 KB ID:	846270
    Attached Files
    Last edited by Jim Frye; 11-22-2021, 07:12 PM.
    Jim Frye
    The Nut in the Cellar.
    ”Sawdust Is Man Glitter”