Announcement

Collapse
No announcement yet.

How to remove the motor pulley to replace bearings?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to remove the motor pulley to replace bearings?

    Part # 10 is what I am trying to remove here, so I can get to the bearing on the motor armature.

    I cant unscrew it if it is screwed on, because the whole motor just turns.

    I tried pulling it along with the bearing with a bearing puller, but it didn't move, and I dint want break the borrowed bearing puller I was using.

    Any advice?





    Last edited by coplate; 03-12-2018, 09:20 PM. Reason: Added question mark to title

  • #2
    Great question. Sorry I do not have an answer though. Welcome to Sawdustzone.org
    just another brick in the wall...

    Comment


    • #3
      Originally posted by Black walnut View Post
      Great question. Sorry I do not have an answer though. Welcome to Sawdustzone.org
      Thanks.


      I feel very silly now, I figured it out. It is simply threaded on, but it is left hand threaded.

      I got it off by putting the wrench in my clamp, and spinning the body of the amature with my hands, instead of trying to clamp the motor windings.


      That, was too easy a mistake to make, and I banged thing up a bit figuring that out.

      Comment


      • #4
        WIll leave this for those who have vast experience.

        Comment

        Working...
        X