Bandsaw Tuning Tutorial?

[phrog]

Some time ago, I followed a link to a tutorial about tuning a band saw. It was made at a woodworking show by a company that made accessories for band saws. I think the link was posted on this site but I can't find it now. Does anyone remember this or know about the video I'm talking about? Thanks.

[rcp612]

This is the most popular one.

[phrog]

That's it, rcp612. Many thanks.

[leehljp]

Last week I purchased a few Timberwolf blades while at Grizzly, Springfield MO. I watched the tutorial when this thread was posted and today, I set my BS up according to the recommendations. I had never centered the blade gullets to the center of the tire as they recommended and I usually had the blade much tighter than they suggested. Also made adjustments on the roller guides as noted. I was able to cut a 4 ft long 2x4 into 4ft long 3/32 slices with the 3 1/2 inch side vertical. No wandering, but that was soft pine.

[JoeyGee]

I've also used this method and it saved my BS from the scrap heap. It didn't make an underpowered, undersized BS great, but made it usable. Can't wait to tune a new BS with this method.