Scrap Ply

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Pappy
    The Full Monte
    • Dec 2002
    • 10490
    • San Marcos, TX, USA.
    • BT3000 (x2)

    #1

    Scrap Ply

    I stopped by a cabinet shop on my way home last night to check the 'scrap' pile. They put their plywood on pallets and set it by the road for picking before it goes to the dumpster. No schedule, so it is 'hit and miss' on what you will find.

    Last night was a 'hit'. Mixture of Maple, Lyptus, and Cherry plys. The bottom piece is 40"x70" Cherry.

    Click image for larger version

Name:	Plywood.jpg
Views:	1
Size:	59.7 KB
ID:	791379

    Wish I could find out what they do with the hardwood drops...
    Don, aka Pappy,

    Wise men talk because they have something to say,
    Fools because they have to say something.
    Plato
  • Uncle Cracker
    The Full Monte
    • May 2007
    • 7091
    • Sunshine State
    • BT3000

    #2
    Nice haul, Pappy. If they consider a 40 x 70 piece "scrap", then you gotta make more room in your woodpile...

    Comment

    • jhart
      Veteran Member
      • Feb 2004
      • 1715
      • Minneapolis, MN, USA.
      • BT3100

      #3
      Good score Pappy.
      Joe
      "All things are difficult before they are easy"

      Comment

      • cabinetman
        Gone but not Forgotten RIP
        • Jun 2006
        • 15216
        • So. Florida
        • Delta

        #4
        That was a good haul Don. You've got to wonder why a 40"x70" sheet was trashed. I think I posted here about a "free" load of Parana Pine I got at the Port. It filled an 8'x10' flatbed about 3' deep, widths from 6" to 10". Didn't find out til I got it back to the shop and really looked at it that it was abandoned because of insects. I had to get the stack fumigated. Still a cheap price to pay.

        I usually don't throw too much away. I try to save stuff according to size, cause you never know when you'll need something. But I'm one of the worst pack rats. You probably already know I still have my baby shoes.

        Comment

        • Duff
          Established Member
          • Apr 2007
          • 164
          • San Antonio, TX
          • Enco 12" RT

          #5
          Soooo...Pappy. . . .wanna tell me where this shop is?
          Enco 12" RT table saw(with router table currently added to right wing), Central Machinary 6" jointer, Delta 16" (17-900) drill press, Ridgid 14" bandsaw, Jet bench top Mortising machine, Porter Cable 6901 series routers (2) and a wide variety of Ryobi 18v tools.

          Comment

          • DonHo
            Veteran Member
            • Mar 2004
            • 1098
            • Shawnee, OK, USA.
            • Craftsman 21829

            #6
            Originally posted by Duff
            Soooo...Pappy. . . .wanna tell me where this shop is?
            No offense but if it was me, I wouldn't tell a soul till I'd filled all the stroage I had AND I might even build a new shed just to store the stuff Of course I gotta believe them throwing out "scraps" 40"X70" is a one off, otherwise they'll be broke before long.

            DonHo
            Don

            Comment

            • cgallery
              Veteran Member
              • Sep 2004
              • 4503
              • Milwaukee, WI
              • BT3K

              #7
              Wow, like finding money by the side of the road!

              Start hinting that it is time for them to upgrade machines!

              Comment

              • gwyneth
                Veteran Member
                • Nov 2006
                • 1134
                • Bayfield Co., WI

                #8
                Just imagine what the guys in the shop are able to take home before what's left is put out...

                Comment

                • Kristofor
                  Veteran Member
                  • Jul 2004
                  • 1331
                  • Twin Cities, MN
                  • Jet JTAS10 Cabinet Saw

                  #9
                  Originally posted by DonHo
                  No offense but if it was me, I wouldn't tell a soul till I'd filled all the stroage I had AND I might even build a new shed just to store the stuff

                  DonHo
                  Heck, I think he already bought the building to store the stuff (now we know why). We're just waiting to see the construction pics

                  Kristofor.

                  Comment

                  • Pappy
                    The Full Monte
                    • Dec 2002
                    • 10490
                    • San Marcos, TX, USA.
                    • BT3000 (x2)

                    #10
                    Originally posted by Duff
                    Soooo...Pappy. . . .wanna tell me where this shop is?
                    North!
                    Don, aka Pappy,

                    Wise men talk because they have something to say,
                    Fools because they have to say something.
                    Plato

                    Comment

                    • Pappy
                      The Full Monte
                      • Dec 2002
                      • 10490
                      • San Marcos, TX, USA.
                      • BT3000 (x2)

                      #11
                      The back side of the 40x70 is scratched up a bit.
                      Don, aka Pappy,

                      Wise men talk because they have something to say,
                      Fools because they have to say something.
                      Plato

                      Comment

                      • Duff
                        Established Member
                        • Apr 2007
                        • 164
                        • San Antonio, TX
                        • Enco 12" RT

                        #12
                        Originally posted by Pappy
                        North!
                        SWEET ! ! ! I've got my GPS ready and I'll be up there Sunday morning...
                        Enco 12" RT table saw(with router table currently added to right wing), Central Machinary 6" jointer, Delta 16" (17-900) drill press, Ridgid 14" bandsaw, Jet bench top Mortising machine, Porter Cable 6901 series routers (2) and a wide variety of Ryobi 18v tools.

                        Comment

                        • Duff
                          Established Member
                          • Apr 2007
                          • 164
                          • San Antonio, TX
                          • Enco 12" RT

                          #13
                          With Sunday coming up. . .what was that address again?
                          Enco 12" RT table saw(with router table currently added to right wing), Central Machinary 6" jointer, Delta 16" (17-900) drill press, Ridgid 14" bandsaw, Jet bench top Mortising machine, Porter Cable 6901 series routers (2) and a wide variety of Ryobi 18v tools.

                          Comment

                          • eezlock
                            Senior Member
                            • Feb 2006
                            • 997
                            • Charlotte,N.C.
                            • BT3100

                            #14
                            scrap ply

                            Good score there Pappy....some people always have the best of luck it seems! If they are having those big pieces as..."scrap" how much are they really using? eezlock

                            Comment

                            • Pappy
                              The Full Monte
                              • Dec 2002
                              • 10490
                              • San Marcos, TX, USA.
                              • BT3000 (x2)

                              #15
                              Originally posted by Duff
                              With Sunday coming up. . .what was that address again?
                              Swing by and we can make a run....

                              Even Oakies are welcome at the Playpen!
                              Don, aka Pappy,

                              Wise men talk because they have something to say,
                              Fools because they have to say something.
                              Plato

                              Comment

                              Working...