After learning that bowling pins have hearts of hard maple, I acquired a few from a co-worker (they are apparently sold used by gun shops for target practice), and decided to try turning one into a carving mallet. Video of the project is attached, as well as a photo of the finished piece. Thanks for watching!
Carving Mallet from a Bowling Pin
Collapse
This topic is closed.
X
X
-
Carving Mallet from a Bowling Pin
Having learned that the interior of bowling pins are hard maple, I try turning one into a carving mallet.Bill in Buena ParkTags: None -
Nice work. That is a creative use for an old bowling pin.\"Experience is the toughest teacher. You get the test first and the lesson later.\" -
I went onto Ebay and checked bowling pens out. Not too expensive except for shipping. I only need 1, but would take two or three. However the shipping is about $12 - $14. I saw some pins for less than $10.
I am kind of obstinate about not buying something in which I have to pay more for shipping costs than for the item.Last edited by leehljp; 01-02-2017, 07:46 PM.Hank Lee
Experience is what you get when you don't get what you wanted!Comment
-
Thanks guys.
Hank, I agree - unless you can buy these from somewhere local, the shipping makes them kind of cost-prohibitive. Probably cheaper to buy some local maple stock and do your own glue up. Apparently these are available at our local gun shops for target practice - you might check yours for the same, or call a bowling alley to see what they do with their old pins.Bill in Buena ParkComment
-
Thanks guys.
Hank, I agree - unless you can buy these from somewhere local, the shipping makes them kind of cost-prohibitive. Probably cheaper to buy some local maple stock and do your own glue up. Apparently these are available at our local gun shops for target practice - you might check yours for the same, or call a bowling alley to see what they do with their old pins.Hank Lee
Experience is what you get when you don't get what you wanted!Comment
-
Nice job Bill, creative re purposing.
Jon
Phoenix AZ - It's a dry heat
________________________________
We all make mistakes and I should know I've made enough of them
techzibits.comComment
Footer Ad
Collapse
Comment